Call hold FXS ports

[Youssef Aoufi]

Hi there,

I would like to know if it is possible to put on hold more than a call using an analog FXS telephone .

I have a Cisco 877v router with a 4 FXS VWIC.

Regards

[Leo Salcie Tejeda]

Hi Youssef,

What do you mean with "using a analog FXS telephone"? Do you want to receive the Music on Hold throught this fxs port?

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

[Youssef Aoufi]

Hi,

The wanted scenario is as follow:

* A (Pstn caller) calls B (Analog phone connected on FXS port of router)

* B putson hold a using hookflash, B hears dial tone

* B calls C (Pstn ) , the call is established

* B puts on hold C using hookflash , B hears dial tone.

The problem is that when B presses the hookflash a second time, a conference is established between A, B and C

Thank you in advance

[Leo Salcie Tejeda]

FXS line not support multiples Hold at the same time.

Read this article for further information:http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fsxholdres.html

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie