ā09-15-2015 10:23 AM - edited ā03-17-2019 04:18 AM
Hi ,
One of my customers approached with the below query.
Can we use Citrix NetScalar server for installing CUCM and UCXN version 11?
Please advise.
regds,
aman
Solved! Go to Solution.
ā09-15-2015 10:32 AM
That has not been tested by Cisco, thus, NOT supported.
ā09-15-2015 10:52 AM
Here's the link -
"Other virtualization vendors/products are not supported at this time (e.g. Microsoft Hyper-V, Citrix Xen, Red Hat KVM, etc.)."
ā09-15-2015 10:32 AM
That has not been tested by Cisco, thus, NOT supported.
ā09-15-2015 07:48 PM
thanks to all for prompt replies.
regds,
aman
ā09-15-2015 10:37 AM
Hi Aman,
It may work and all will be hunky dory, till the time you may need to raise a TAC SR and TAC would refuse to work on the issue.
Then the customer WILL turn around and will hold accountable the Design/Implementation Engineer!!
:-)
So, the golden rule is, if TAC says unsupported, it is unsupported (in my case they wanted to install on unsupported version of VMWare)
ā09-15-2015 10:52 AM
Here's the link -
"Other virtualization vendors/products are not supported at this time (e.g. Microsoft Hyper-V, Citrix Xen, Red Hat KVM, etc.)."
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: