I am upgrading a customer from 22.214.171.12401-1 to 10.5
each time the upgrade fails and shows no inactive partition (obviously since the upgrade failed)
I tried upgrading to 10.5.2.11900-3 and 10.5.2.10000-5 both with the same results.
I will attach the install log to the post.
More detail on the steps taken.
loaded new version of 8.6 on UCS server and restored the call manager database
installed the version3-keys.cop file and then tried the upgrade which fails.
I also completely reloaded the steps above and tried to upgrade to the latest 126.96.36.199900-8 but after that upgrade the server would no longer boot :/
I have had a tac case open for a week on it with no luck so far. they had me delete a SIP conference phone profile and try the upgrade again. nothing changed
anyone see anything in the logs that might help? i can't decipher them :P
I think I have it fixed!
Another engineer on my team helped look at things and he noticed that the upgrade after the Auto registration was turned off actually was timing out.
So he changed the VM to have more ram and 2 processors. once he did that the upgrade ran fine. I did the switch version and it came back up. I am shutting it down to make some changes and booting back up.
thanks again for everyones help!