cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
574
Views
0
Helpful
3
Replies
Highlighted
Beginner

Call not going from analog fxs to ip phone

Scenario--        IP phone(ext.no 2000 and 2001)--   Call manager - Voice gateway 2811--   2 FXS port (2 Analog phone(4000 and 4005)

I configured using h323 for voice gateway and now after creating dial peer and all, i am able to dial from ip phone to ip phone and IP to analog phone and from analof to analog phone but not able to dial from analog to ip phone.After some time, fast tone is there but no call happens.

Please help me as stuck in demo lab as it is very urgent.

3 REPLIES 3
Highlighted
Beginner

hi mate,

Please post your dial-peers configuration from the 2811 and also "show call hist voice brief" after your call attempt from FXS to IP Phone has failed.

If you have any "h323-gateway" statements in 2811 configuration, please post the the network interface section.

Cheers,

Boris

___

Please rate helpful posts
Пожалуйста оценивайте полезные сообщения

_____ Please rate helpful posts Пожалуйста оценивайте полезные сообщения
Highlighted

Hi there.

I have the exact sane issue.  Calls from fxs analog phones to ip phones connected to cucm fails.  Cause value = 38. When the ip phones are on SRST The call works.

Thank you in advance

Highlighted

Hi there,

It's working now. I forgot to put the H323 commands on the voice interface:

h323-gateway voip interface

h323-gateway voip bind srcaddr X.X.X.X

Best regards

Content for Community-Ad