cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
628
Views
0
Helpful
4
Replies

Call Park not working 8851 phone mgcp gateway.

Stewart Thomas
Level 1
Level 1

Just changed out some SCCP phones for newer SIP 8851. Everything works, but have crazy issue with call park. Call park works fine IP phone to IP phone. When a call comes in the MCGP gateway via PRI. I Park the incoming call no issue. Retrieve the parked call no issue. I can do this twice. On the third time I park the call the call gets disconnect. This is only happening on Sip phones not SCCP phones at this Particular MGCP gateway. 

4 Replies 4

Gregory Brunn
Spotlight
Spotlight

Seems like it is time to pull the logs of CUCM and see what message is being sent with the disconnect and see if any know bugs exist.

Well I pulled debug isdnq931 off of gateway.  Seems as if the telco is disconnecting call. Just don't see how this could be a telco issue. I've seen stranger things though.

*May 8 14:07:12.372: ISDN Se0/1/0:23 Q931: TX -> NOTIFY pd = 8 callref = 0xC568
Connected Address i = 0x0081, '6212'
Notification Ind i = 0xF1
*May 8 14:07:12.388: ISDN Se0/1/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x4568
Cause i = 0xE2E56E - Message not compatible with call state

The provider is responding to the NOTIFY Message. Can we have complete isdn q931, What happens when you hold 1st and 2nd time?

*** Please rate helpful post; if applicable

Thanks,
Haris

Below is debug output.

*May 8 14:04:41.632: ISDN Se0/1/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xC568
Channel ID i = 0xA98382
Exclusive, Channel 2
*May 8 14:04:41.632: ISDN Se0/1/0:23 Q931: TX -> ALERTING pd = 8 callref = 0xC568
*May 8 14:04:41.632: ISDN Se0/1/0:23 Q931: TX -> NOTIFY pd = 8 callref = 0xC568
Connected Address i = 0x0081, '6200'
Notification Ind i = 0xF1
*May 8 14:04:41.656: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref = 0x4568
Cause i = 0x82E16E - Message type not implemented
Call State i = 0x07
Notification Ind i = 0xF1
*May 8 14:07:07.832: ISDN Se0/1/0:23 Q931: TX -> NOTIFY pd = 8 callref = 0xC568
Connected Address i = 0x0081, '6212'
Notification Ind i = 0xF1
*May 8 14:07:07.844: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref = 0x4568
Cause i = 0x82E16E - Message type not implemented
Call State i = 0x0A
*May 8 14:07:07.848: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref = 0x4568
Cause i = 0x82E16E - Message type not implemented
Call State i = 0x0A
*May 8 14:07:07.852: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref = 0x4568
Cause i = 0x82E16E - Message type not implemented
Call State i = 0x0A
*May 8 14:07:12.372: ISDN Se0/1/0:23 Q931: TX -> NOTIFY pd = 8 callref = 0xC568
Connected Address i = 0x0081, '6212'
Notification Ind i = 0xF1
*May 8 14:07:12.388: ISDN Se0/1/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x4568
Cause i = 0xE2E56E - Message not compatible with call state