02-10-2017 04:32 PM - edited 03-17-2019 09:29 AM
Help I can retrieve parked call by pressing the button PickUp and the dn # and i see it inputs *01 but if I would just pick up the phone an do * I would get fast busy right away. So the question is to have it manual pick up do i need to create a dial peer or how is it done?
02-10-2017 04:50 PM
You need to mention what you're working with, and not just what you want to do, or what issue you're having.
In order to retrieve a parked call, you just need to dial the number in which it was parked.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsgd-712-cm/fscallpk.html#wp1030687
02-10-2017 06:54 PM
Ops sorry your right. I have cme 8.5 and 7940 phones.
here are the dns for park
ephone-dn 50
number 01 no-reg both
park-slot timeout 60 limit 5 recall
description park slot
!
!
ephone-dn 51
number 02 no-reg both
park-slot timeout 60 limit 5 recall
description park slot
Now im able to retrieve the call by pressing the key PickUp and dial 01 if its parked on 01 but if I want to just dial *01 it gives me busy. What command would it be to set it up so i can do it by *01?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide