04-22-2015 12:46 PM - edited 03-17-2019 02:45 AM
Call Recording 'Beep'.
I have multi line phones- even though only recording on one of those lines all will BEEP.
the beep is enables on the phone, individual lines have the actual recording enabled- where required.
How can I solve this?
CUCM 8.5.1
7961 phones
Mark
Solved! Go to Solution.
04-22-2015 05:19 PM
The beep is a function of the phone and not the line.
The only call recording options you have on the DN side are Recording Profile and Recording Enabled.
04-22-2015 01:40 PM
Hi Mark,
Go to Phone Configuration->Recording Tone: Enable.
Regards
04-22-2015 02:32 PM
I want the beep for the recorded lines, just not the other lines.
The only place I see the 'Recording Tone' is on the device.
Not on the lines.
On the lines there is the Recording Enable- but nothing about the beep.
This phone has multiple lines...
Mark
04-22-2015 05:19 PM
The beep is a function of the phone and not the line.
The only call recording options you have on the DN side are Recording Profile and Recording Enabled.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide