cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
449
Views
0
Helpful
3
Replies

Call transfer with an expansion line

shannon3571
Level 1
Level 1

We have 2 users that are sharing an extension on 7942 dual line phones.  The secretary always answers the phone and then transfers the call to the boss but is goes straight to voicemail.  We have setup an expansion line to receive the transfer  but it still fails.  We are using CME/CUE.

ephone-dn  1  dual-line
number 1111

name secretary

ephone-dn  2  dual-line
number 1112

name boss

ephone-dn  3
number 1113
label Expansion Line
name Expansion Line

ephone  1
type 7942
button  1:1 2:2

ephone  2
type 7942
button  1:2 2x11

telephony-service

transfer-system full-consult

Is there something that we are missing or is there a better way to do this?

Thanks for your help

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Shannon,

For the Manager phone I would try;

ephone  2
type 7942
button  1:2 2:3

And have the Admin transfer to 1113.

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

View solution in original post

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Shannon,

For the Manager phone I would try;

ephone  2
type 7942
button  1:2 2:3

And have the Admin transfer to 1113.

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

That was easy enough...Thanks Rob

Hi Shannon,

You are most welcome my friend

Cheers!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: