02-25-2011 06:00 AM - edited 03-16-2019 03:38 AM
Hi,
We have an 2921 router with FXO ports and these FXO ports are under MGCP control from callmanager 7.1
Connected on these FXO ports are some FCT's.
All works fine, inbound and outbound.
The problem we face is the caller-id when someone calls the FCT.
The FXO MGCP configuration has an attendant DN configured and the phone rings, when we call the FCT.
The phone that answers the call cannot see the caller-id, we see as caller-id "unknown"
Is there something we can do on the MGCP configuration from Callmanager, or is this the way it works?
Thanks,
Jan
02-25-2011 11:31 AM
Hi Jan,
CLID support for MGCP-FXO ports was not added until CUCM 8.x
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_0_1/delta/cmadmin.html#wp1115153
Cheers!
Rob
02-28-2011 05:22 AM
Hi Rob,
Thanks for the answer, shall try to convince customer to switch to 8
Bye,
Jan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide