cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
436
Views
0
Helpful
4
Replies

Caller ID on Forwarded calls

On our configuration ext 101 is call-forwarded to ext 102 when busy after 15 seconds. Then sometimes extension 102 will forwarded all his call to an external number(e.q. mobile number).

In this situation, when someone calls on ext 101 and she did not answer the call within 15 secs it is forwarded to ext 102 which is also forwarded to his mobile. The mobile will ring but the caller ID that will apprear on his mobile is the DID of ext 101.

Could you please help me how to configure so that the original caller will appear on the caller id.

4 REPLIES 4

By the way, we are using CME ver 7.0

HI,

You can  try this..

voice translation-rule 1

rule 1 /^101/ /102/

voice translation-profile 1

translate redirect-called 1

translate redirect-target 1

dial-peer voice x pots (this will be your outgoing dial-peer to the PSTN

translation-profile out 1

Please rate useful posts

"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"

Please rate all useful posts

Hi Forbes,

What platform are you using? is CUCM or CUCME

Please rate useful posts

"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"

Please rate all useful posts
paolo bevilacqua
Hall of Fame Master

This is aften asked, anyway:

Are you in the US? If not, you telco will only allow your DID numbers to be dsiplaye when making a call. It doesn't matter  if the call is begin forwarded or not.

Content for Community-Ad

Spotlight Awards 2021