06-22-2012 12:41 AM - edited 03-16-2019 11:48 AM
On our configuration ext 101 is call-forwarded to ext 102 when busy after 15 seconds. Then sometimes extension 102 will forwarded all his call to an external number(e.q. mobile number).
In this situation, when someone calls on ext 101 and she did not answer the call within 15 secs it is forwarded to ext 102 which is also forwarded to his mobile. The mobile will ring but the caller ID that will apprear on his mobile is the DID of ext 101.
Could you please help me how to configure so that the original caller will appear on the caller id.
06-22-2012 12:53 AM
By the way, we are using CME ver 7.0
06-22-2012 01:17 AM
HI,
You can try this..
voice translation-rule 1
rule 1 /^101/ /102/
voice translation-profile 1
translate redirect-called 1
translate redirect-target 1
dial-peer voice x pots (this will be your outgoing dial-peer to the PSTN
translation-profile out 1
Please rate useful posts
"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"
06-22-2012 12:56 AM
Hi Forbes,
What platform are you using? is CUCM or CUCME
Please rate useful posts
"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"
06-23-2012 09:41 AM
This is aften asked, anyway:
Are you in the US? If not, you telco will only allow your DID numbers to be dsiplaye when making a call. It doesn't matter if the call is begin forwarded or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide