03-14-2018 02:34 AM - edited 03-18-2019 12:23 PM
We have SIP Trunk Integration between CUCME and CUCM. When we make calls from CUCME to CUCM We would like to see the Caller Name Displayed when the remote Phone is ringing. Currently the Caller Name is displayed when call is Connected.
Tried to enable asserted-id pai globally but id did not resolve issue. Rather now we are not able to see the calling name even when call is connected.
Any Idea how can i Achieve same ??
03-14-2018 04:55 AM
are you using H323 between cucm and cme?
if so check diplay IE on the GW configuration in cucm
03-14-2018 04:59 AM
We are Using SIP Between CUCM and CUCME
03-14-2018 06:15 AM
03-14-2018 06:33 AM
I am using SIP Phones
03-14-2018 06:35 AM
When call is Initiated from CUCM to CUCME callerId is visible in Both Ringing and connected state. and When call is made from CUCME to CUCM it is not visible.
03-14-2018 06:37 AM
03-14-2018 06:45 AM
03-14-2018 09:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide