CallManager 4.2(3) to 7.0(2) upgrade failes due to DMA error

[wkhanagov]

I'm receiving the following error when running the DMA tool in CM 4.2(3).

***> DATA PROCESSING TESTS REVEALED AN ISSUE WHICH GENERATED THE FOLLOWING EVENT:

Sorry. Unable to parse and identify error number. Raw Message follows:

07/09/2009 13:23:43.046 installdb| installFull *ERROR* Prior Cancel or Error Processing fixisstandard(DSN=ids_ccm)|

Can anyone shed some light on what this error means?

Thanks!

- William

[irisrios]

Check the following:

- From ccmadmin -> system; make sure that all servers are CM servers within the cluster.

- Change the IP address of publisher and subscribers to hostname.

- Verify all the hostnames are in uppercase.

- Verify windows computer name matches with the hostname.

[garry.connolly]

William

I am having exactly the same issue as you experienced whilst running DMA tool in v4.2(3)

Sorry. Unable to parse and identify error number. Raw Message follows:

09/21/2009 11:24:34.648 installdb| installFull *ERROR* Prior Cancel or Error Processing fixisstandard(DSN=ids_ccm)|

Did you manage to rectify this issue ?

Regards

Garry

[hostmaster]

Hi,

We are dealing with this same problem on a DMA upgrade from 4.3 to 7.1.5.

Changeing the server ip addresses to names did not solve the problem.

Did you solve the problem?

Thank you,

Pall

pallo@nyherji.is