cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

101
Views
0
Helpful
1
Replies
Highlighted
Beginner

Can CCA be used to configure a CUCM server on a C2951 router?

We are transitioning from a UC560 router acting as our CME/CUE VoIP server, to a full blown C2951 with CME 10.0 and CUE 8.6.7.

Can I use CCA as a GUI based configuration tool, the same as I was able to on the UC560?   Or do I need to perform all my configuration setup on the new VoIP router at the CLI?   Or is there another GUI based tool that can be used to help configure my new VoIP server?

Everyone's tags (2)
1 REPLY 1
Highlighted
Hall of Fame Cisco Employee

http://www.cisco.com/c/en/us

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/release/Notes/cca_3_2_1_relnotes.html

There's a CME GUI but it's also limited, you're better off doing it all via CLI

HTH

java

if this helps, please rate
CreatePlease to create content
Content for Community-Ad
Future of Work Virtual Summit Day 5

Cisco COVID-19 Survey