cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
771
Views
0
Helpful
5
Replies

Can I config to use PIN to make call for some pattern in CME

I config CME 9.0. Can I use PIN or code to dial some pattern such as internation call in CME? When user need to call to other country, they must use special pin or something before can make call.

sample of calling usage (95 is normal access code)

local call : 95 01234567

international call : 1234 0071231233456     (use 1234 as pin)

My customer confirmed that CME can do, but I can't find any feature that match his requirement. I found FAC, but it will ask some code after user dial number already.

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

If you want that PIN to be validated, you'll have to create your own script.

As you mention, FAC will prompt you for it after you dial.

If you don't need to validate it, just configure the dial-peers with it and discard it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

If you want that PIN to be validated, you'll have to create your own script.

As you mention, FAC will prompt you for it after you dial.

If you don't need to validate it, just configure the dial-peers with it and discard it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hi Jaime,

You mean I need to create TCL to validate it by myself?

Thanks for your answer.

Correct

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

One more question, can I do this method (ask PIN before call) in CUCM server?

No, FAC and CMC work the same way, after you dial the number you're prompted for auth

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate