cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1295
Views
15
Helpful
3
Replies

Can't Acces to /telephony_service.html

Mario Sierra
Level 1
Level 1

Few days ago, I was trying to access to telephony service, but suddenly appears this: Telephony service Issue.jpg

I don't know what's going on, first try to change the browser, then try to change the IP, update the service. but nothig worked.

I've made a debug when I trying to acces to the service and the CISCO UC5040 shows me that,

Jun 27 16:58:17: its_urlhook url: /telephony_service.html, method 1

Jun 27 16:58:17: Wed, 27 Jun 2012 14:58:17 GMT ___My_Public_IP___ /telephony_service.html auth_required

        Protocol = HTTP/1.1 Method = GET

Jun 27 16:58:17:

Jun 27 16:58:25: its_urlhook url: /telephony_service.html, method 1

Jun 27 16:58:25: validate_username_password (_user_, _passwd_)validate_admin_user (admin: _user_)

validate_admin_user: validate admin [0] locally

validate_admin_user: password from acct is matched!

validate_username_password: passed for system admin

Jun 27 16:58:25: Wed, 27 Jun 2012 14:58:25 GMT ___My_Public_IP___ /telephony_service.html ok

        Protocol = HTTP/1.1 Method = GET

Jun 27 16:58:25:

Jun 27 16:58:25: telephony_service_server_get_action url:/telephony_service.html

Jun 27 16:58:26: its_urlhook url: /ITSMain, method 1

Jun 27 16:58:26: validate_username_password (_user_, _passwd_)validate_admin_user (admin: _user_)

validate_admin_user: validate admin [0] locally

validate_admin_user: password from acct is matched!

validate_username_password: passed for system admin

Jun 27 16:58:26: Wed, 27 Jun 2012 14:58:26 GMT ___My_Public_IP___ /ITSMain ok

        Protocol = HTTP/1.1 Method = GET

Jun 27 16:58:26:

Jun 27 16:58:26: telephony_service_server_get_action url:/ITSMain

Jun 27 16:58:26: validate_username_password (_user_, _passwd_)validate_admin_user (admin: _user_)

validate_admin_user: validate admin [0] locally

validate_admin_user: password from acct is matched!

validate_username_password: passed for system admin

Jun 27 16:58:26: ipkeyswitch_generate_html_header: start 1, 0

Jun 27 16:58:26: ipkeyswitch_generate_html_header: admin java variable

Jun 27 16:58:26: outputPhoneLoad: phoneLoad_num=15

Jun 27 16:58:29: ipkeyswitch_generate_html_header: admin variable done

Jun 27 16:58:30: its_urlhook url: /favicon.ico, method 1

Jun 27 16:58:30: lds_urlhook, url=/favicon.ico

Jun 27 16:58:30: its_urlhook url: /favicon.ico, method 1

Jun 27 16:58:30: lds_urlhook, url=/favicon.ico

I really appreciate you colaboration.

1 Accepted Solution

Accepted Solutions

Anas Abueideh
Level 9
Level 9

Hi,

are you configured the following:

ip http server

ip http authentication local

no ip http secure-server

ip http path flash:

also share your current config to check

HTH

Anas

please rate if it is helpful

View solution in original post

3 Replies 3

Anas Abueideh
Level 9
Level 9

Hi,

are you configured the following:

ip http server

ip http authentication local

no ip http secure-server

ip http path flash:

also share your current config to check

HTH

Anas

please rate if it is helpful

Thanks a lot Anas!!

But, I tell you what: this service is configure in Spain, and if you know in our language we use the accents like, á-é-í-ó-ú, and thats was my problem, an user with privilege had configured a name with an accent, and telephony service doesn't like that.

I deleted that user and it works again!

Thanks!!

Mario Sierra
Level 1
Level 1

Watch out with the characters that telephony service don't permit and/or are denied/forbbiden for the system!!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: