cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
130
Views
0
Helpful
0
Replies
Highlighted
Beginner

Can't Get Access Codes to Work on VG310 FXS Port

Hi,

I had another discussion opened on this but I closed it by accident.  I'm trying to set up an analog port on a VG310 to be able to log into an existing hunt group.  I have set the following commands but I'm getting fast busys on the access codes.  Does the gateway have to be set up as SCCP in the Call manager for this to work?  According to another discussion on here, it doesn't.  Please see below and let me know if I'm missing something.

 

TKCB-AVG-TEST-310#show sccp all
SCCP Admin State: UP
Gateway Local Interface: GigabitEthernet0/0
IPv4 Address: 10.52.2.80
Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.250.91.115, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 6
Trustpoint: N/A
Call Manager: 10.250.91.214, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 5
Trustpoint: N/A
Call Manager: 10.250.91.213, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 4
Trustpoint: N/A
Call Manager: 10.250.91.112, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 3
Trustpoint: N/A
Call Manager: 10.250.91.111, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 2
Trustpoint: N/A
Call Manager: 10.250.91.110, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 1

--------------------------------------------------------------------

CCM Group Identifier: 1
Description: None
Binded Interface: None
Associated CCM Id: 4, Priority in this CCM Group: 1
Associated CCM Id: 3, Priority in this CCM Group: 2
Associated CCM Id: 2, Priority in this CCM Group: 3
Associated CCM Id: 1, Priority in this CCM Group: 4

--------------------------------------------------------------

TKCB-AVG-TEST-310(config)#sccp ccm group 1
TKCB-AVG-TEST-310(config-sccp-ccm)#stcapp
stcapp already running

--------------------------------------------------------------

dial-peer voice 1 pots
service stcapp
port 0/0/0

--------------------------------------------------------------

voice-port 0/0/0
timeouts ringing infinity
caller-id enable

-----------------------------------------------------------------

TKCB-AVG-TEST-310#show stcapp feature codes

stcapp feature access-code
malicious call ID (MCID) ***
prefix **
call forward all **1
call forward cancel **2
pickup local group **3
pickup different group **4
meetme-conference **5
pickup direct **6
forward-to-voicemail **7
cancel call waiting **8
hunt-group login-logout **9

stcapp feature speed-dial disabled

stcapp call-control mode is standard mode

-----------------------------------------------------------------

 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards