01-22-2008 04:30 AM - edited 03-15-2019 08:21 AM
Hi,
We need to telnet to one of the phones to monitor some traffic but we can't telnet to it (192.168.3.53), whenever we try we get the response:
C:\>telnet 192.168.3.53
Connecting To 192.168.3.53...Could not open connection to the host, on port 23:
Connect failed
Has anyone come accross this before?
TIA
Tim
01-22-2008 07:21 AM
Hi,
I think these phones support ssh only. If you search the forum, there are post explaining how to do that, it's a bit complicated.
And after you do ssh into the phone, there is really much that you can do.
Hope this helps, please rate post if it does!
01-22-2008 07:27 AM
Thanks, I've looked at the SSH but I wanted to look at the traffic logs to/from the phone. Can you suggeset any ways of doing this?
Thanks,
Tim
01-22-2008 03:09 PM
These have to be accessed by the CCM or whatever controls the phone, details varies by the version you have.
03-10-2008 06:46 AM
Try SSH not telnet as i am in on mine
also you may need the correct key to get in
03-21-2008 07:38 PM
what do you use for a id and password?
03-22-2008 04:49 AM
See complete instructions at:
http://www.voip-info.org/wiki/view/SSH+with+PuTTY+to+Cisco+IP+Phone+
Hope this helps, please rate post if it does!
03-22-2008 05:21 AM
p.bevilacqua << Very good read
But i did not need to create the key as we just reflashed the phone and got in via ssh with the program
* still looking for a working config for sip provider
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: