09-25-2012 03:39 PM - edited 03-16-2019 01:23 PM
Hi Team
I filter users while IpPhone field is different from emptiness, such as the filtering?
! (ipPhone = null)?
Is it more advisable to have the field to zero and let the filter like this:! (ipPhone = 0)?
Thank you
Regards
Solved! Go to Solution.
09-26-2012 11:16 AM
A simple and effective filter to use is this..
(ipPhone=*)
This will allow CUCM to import only users with valid entries in their IP phone field. I think its much better
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
09-25-2012 06:31 PM
If this filter works for you it is perfectly fine then, I would not worry about hard coding the field to 0 or anything else that does not make sense.
Chris
09-26-2012 10:54 AM
Hi Chris
I can use the command ldapsearch in the Active Directory for test the filter,
Is it right to the filter : !(ipPhone=null) ?
Thank you
Regards
09-26-2012 11:02 AM
Yesenia,
The actual meaning of this filter is this "dont import any user with ipphone field = null"
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
09-26-2012 11:13 AM
Hi aokanlawon
Then with "null" if I can indicate empty, is that correct?
Thank you
Regards
09-26-2012 11:16 AM
A simple and effective filter to use is this..
(ipPhone=*)
This will allow CUCM to import only users with valid entries in their IP phone field. I think its much better
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
09-26-2012 11:38 AM
Thank you,
I'll be doing tests, I reported how everything went.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: