I have looked through all of the discussions on this topic and I have tried several ways to associate an ephone-dn with an FXO port.
My simple configuration:
dial-peer voice 80 pots
number 4179 secondary 2087724179
description Telcor Intercom
A user calls 4179 and gets a slow-busy (not reorder). I ran a debug voice dialpeer default
I can see the 4179 extension being sent to ephone-dn 108 but it doesn't go any farther. I was expecting the "trunk 30" to pass "30" to
dial-peer voice 80 pots "destination pattern" but the dialpeer debug stops at ephone-dn 108.
I deleted ephone-dn 108 and created a dial-peer with a destination pattern of 4179 pointing to port 2/0/8 and when 4179 is dialed the Intercom system picks up the call.
I order for this to work as an ephone-dn do I need to associate it with an ephone or several ephones (second button)? I am just testing to see if what I have configured will work, maybe I'm just going at it wrong during the testing of the system.
Hi, My name is JanetMy portal ID is https://nwswdvcas-taw.my.webex.com/meet/janet.dvcasI do want you please to delete both my accounts with Webex (free and Paid)So my organisation can join me on another Webex Account as another Host. I did foll...
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From firstname.lastname@example.org (Gateway - Private IP 172.24.10.6) and i need email@example.com (Gateway - Public IP 184.108.40.206). How can I change in theGateway the ...