Hi everyone.
After begin I want to tell you that I´m a newby.
I can make the calls mix (conference). All telephones show in the screen "cannot complete conference" and put the call on hold and open a new line.
I try removing the "conference hardware" and nothing.
I have an UC520.
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
!
voice class custom-cptone jointone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice-card 0
dsp services dspfarm
ephone-template 1
softkeys hold Join Newcall Resume Select
softkeys idle Redial Newcall Cfwdall Gpickup Pickup Dnd Join RmLstC
softkeys seized Endcall Redial Meetme Cfwdall Pickup
softkeys connected Hold Endcall Trnsfer Confrn ConfList Join Park RmLstC Select
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register confprof1
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
ephone 6
conference drop-mode creator
conference add-mode creator
conference admin
device-security-mode none
description Ulima
mac-address 0025.84A2.E98E
ephone-template 1
type 7942
button 1:6
........................................
TUC520#sh voice dsp group all
DSP groups on slot 0:
dsp 1:
State: UP, firmware: 26.8.1
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 10
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 225, reserved credits: 0
Signaling channels allocated: 10
Voice channels allocated: 1
Credits used (rounded-up): 15
Voice channels:
Ch01: voice port: 0/4/0, codec: g711ulaw, credits allocated: 15
dsp 2:
State: UP, firmware: 26.8.1
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 240
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 2
0 DSP resource allocation failure
My phones are 7975 and i configure the octo-line
Thanks to all
