cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1784
Views
0
Helpful
2
Replies
Beginner

Cannot register ip phones on Cisco 1941/K9 router

Hi, i am looking for help in configuring the Cisco 1941/K9 router to be able to handle SIP Trunking. Currently i have linksys router and it works fine with Cisco 7960 phones and Asterisk server. But when i switch to new Router (1941) the whole system just stop working. The phones don't register with the server on LAN and the server doesn't register with any thing either on LAN or WAN. So i think i need to open up (configure the router) Port 5060 and 5061. Is someone has any suggestion, as i have litterally given up with the cisco support service, as they have no clue what i am talkig about.

Everyone's tags (5)
2 REPLIES 2
Participant

Re: Cannot register ip phones on Cisco 1941/K9 router

Hi,


Please check the following link

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080b3e123.shtml

What protocol are you using the phone? SIP or Skinny?

Can you collect "debug ccsip message" and gateway configuration.

Thanks

- abu

Highlighted
Beginner

Re: Cannot register ip phones on Cisco 1941/K9 router

Hi Abu Hadee,

thanks for the respnonse, i am using SIP configurations on the phones and they have to be connected to Asterisk box. So do you have suggestions.

Thanks,

Imran

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here