CAR Scheduler Alert - Physical Log size 20000 is too small
We have a clients CUCM Server that has produced the following alert:
%UC_CAR-2-CARIDSEngineCritical: %[ClassID=***********_car8_6_2_22900_9-7[ClassMsg=Dynamic Server Initialization failure.][Specific-Msg=WARNING! Physical Log size 20000 is too small. Physical Log overflows may occur during peak activity. Recomme][AppID=Cisco CAR Scheduler][ClusterID=][NodeID=padeobxtela01]: Pay Attention. This alarm does not compromise data or prevent the use of the system.
AppID : Cisco Syslog Agent
I'm aware that ideally I need to expand the Physical Log file size but I'm not sure where this is changed. Can anyone point me in the right direction?
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From email@example.com (Gateway - Private IP 172.24.10.6) and i need firstname.lastname@example.org (Gateway - Public IP 184.108.40.206). How can I change in theGateway the ...
Need some help with a gadget development. Have a gadget built however it triggers when a call comes to an agent and immediately after when the agent goes into "RESERVED" state. I need to pop a window that is working however the pop happens bef...