01-23-2007 05:06 AM - edited 03-14-2019 07:41 PM
problem:
I have a CCM 5.0 on Virtual Machine, it starts up and prompts for the admin account after I entered the account every thing goes fine, finally I got admin:
prompt with a black screen (for CCM linux OS commands)
I set IP address
then when I tried to open :
http://<ccm-IP>/ccmadmin
the page cannot be displayed ..
are there any extra work should i do to log into the main CCM administration window?!
please help
thanks
01-23-2007 05:36 AM
01-23-2007 06:02 AM
01-23-2007 11:17 AM
How is your VMWare nic setup on the PC or server ? Is it bridging the IP of the host machine ? Do you have an ip on the host and another ip on the callmanager (same subnet) ?
01-23-2007 11:30 AM
yes it is bridged with the host, and the host ip is 10.10.10.100 and the guest ip is 10.10.10.10
01-23-2007 11:37 AM
Did you reboot the server since the first time install was complete ? I have had trouble logging in the first time via web immediately after i completed a cm 5.0 install. I had to reboot the server. That was weird.
With CM 5.0 you should be able to browse using http and https and also without the /ccmadmin url (Just Http://
01-23-2007 11:42 AM
yes Sankar
unfortunetly I did many reboots and other issues like (utils) command with its options of service restart, stop and start,....
with the same result!
01-23-2007 10:38 PM
Did you try to install the VM on anotehr Server( check the server cabability to handle the VM)
01-23-2007 10:57 PM
Try it
01-23-2007 11:23 PM
beddi aroh a5asserhom
next I'll try it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide