06-13-2014 02:12 PM - edited 03-16-2019 11:06 PM
all I came into a new setup where they have the following:
DN: 11 digits (1XXXXXXXXXX) which matches the DID's
all LDAP users has +1 dialing in telephone field
I guest this was mainly used for + dialing
used across 5 locations
***
Now they want to add site codes (CCC+last4) 7 digits for internal dialing
-- plan on adding 20 more sites.
this would not be so bad if the site had DID's in a con't range. I am hoping this does not turn into a nightmare
plan:
leave the DN at 11 digits
change the display to show CCC+last4
create translation for the site code (CCC)
CCC.XXXX -- predot, prefix 1678507 = 16785075555
has anyone done this type of dial plan before? Pros and Con
06-14-2014 04:29 AM
Hello!
Please, explain a little bit more "this would not be so bad if the site had DID's in a con't range"..
Can u put some examples may be?
Regards,
Kirill
06-14-2014 04:56 AM
You got it, you need separate TPs to cover each DID range assuming different area code or exchange, obviously if only the last 4 digits are different you can summarize it even if they are not consecutive as site id is unique and you only prefix area code + exchange.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide