CCME Call Forward from one Hunt Group to another Hunt Group Failure

[Derek McCormick]

Hi I have a couple of hungroups in Cisco Call Manager Express. I am trying to configure a Call Forward no answer from one hunt group to another. Does anybody know if this is possible? If so, is there a config available? Here is my config, but it is not working.

Thanks,
Derek

voice hunt-group 20 parallel
final 2290
list 2201,2251,2252
timeout 30
pilot 2209

[Rob Huffman · Accepted solution]

Hi Derek,

This is supported with the restriction shown below;

final number Router(config-voice-hunt-group)# final 8888

Defines the last extension in a voice hunt group. If a final number in one hunt group is configured as a pilot number of another hunt group, the pilot number of the first hunt group cannot be configured as a final number in any other hunt group.

From;

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#72373

Cheers!

Rob 

[Derek McCormick]

thanks for the clarification Rob