08-02-2010 08:39 AM - edited 03-16-2019 12:02 AM
Hi
Im using SCCP. I have a bunch of direct dial numbers. I'd like them to show up when I call someone from the relevant extension, for examlpe when I call from handset 203, I'd like the DDI 433585 to show up on the recipients end - not the primary number. Can it be done?
Here is an example of the rules we have:
voice translation-rule 1
rule 1 /433599/ /201/
rule 2 /433585/ /203/
!
voice translation-rule 2
rule 1 // /90/
!
!
!
voice translation-profile 1
!
voice translation-profile ADDZERO
translate calling 2
!
voice translation-profile INCOMINGDDI
translate calling 2
translate called 1
!
08-04-2010 03:58 PM
You can assign a "name" to the ephone-dn, the name would be included in the alerting and connected messages and show up on the phone
It would display on the phone like below:
From Test6511 (6511)
when configured like this:
ephone-dn 11 dual-line
name Test 6511
Thomas Dillingham
08-05-2010 08:37 AM
Yup, you just need to translate in the reverse direction to expand the internal extn to the DID for the outbound calls' ANI:
voice translation-rule 3
rule 1 /201/ 433599/
rule 2 /203/ /433585/
!
!
voice translation-profile internal-to-did
translate calling 3
dial-peer voice 1 pots
destination-pattern 9T
translation-profile out internal-to-did
-Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide