11-12-2012 01:34 AM - edited 03-16-2019 02:08 PM
Hi,
Is there a way to route calls on CCME based on the calling number?
The problem is like this:
I have a couple of phones that i always want to go out on a sip trunk.
The rest of the phones should use the analog lines.
Thank you,
laszlo
Solved! Go to Solution.
11-12-2012 11:46 AM
That is often asked, you can use number manipulation or COR list for that.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
11-12-2012 11:46 AM
That is often asked, you can use number manipulation or COR list for that.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
11-13-2012 12:32 AM
Thanks Paolo, in the mean time i aslo find the COR.
Thanks,
laszlo
11-13-2012 03:41 AM
Thank you for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: