11-12-2012 01:34 AM - edited 03-16-2019 02:08 PM
Hi,
Is there a way to route calls on CCME based on the calling number?
The problem is like this:
I have a couple of phones that i always want to go out on a sip trunk.
The rest of the phones should use the analog lines.
Thank you,
laszlo
Solved! Go to Solution.
11-12-2012 11:46 AM
That is often asked, you can use number manipulation or COR list for that.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
11-12-2012 11:46 AM
That is often asked, you can use number manipulation or COR list for that.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
11-13-2012 12:32 AM
Thanks Paolo, in the mean time i aslo find the COR.
Thanks,
laszlo
11-13-2012 03:41 AM
Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide