CDR at 9.1.1 CUCM and origMediaTransportAddress_IP
we collect CDR from CUCM 9.1.1 to send it to a analysis software.
Normally the field in CDR named origMediaTransportAddress_IP are filled with the gateway IP address if calls come from PSTN. In our case there is always 0.0.0.0 as IP address so that the analysis software cant analyze this call.
At internal calls this field is correct filled with the IP from the called or calling party ip phone.
Is it possible to set any command in IOS at the gateway to fill this field with the correct value? The gateway is configured as MGCP. Is it possible to configure some at the CUCM to get the right IP in CDR field? Or is this a bug?
The IOS at gateway is 15.2(4)M3, file is c2900-universalk9-mz.SPA.152-4.M3.bin.
Good morning in this Cisco documentFeature Configuration Guide for Cisco Unified Communications Manager, Release 11.5 it saysWhisper CoachingUnified Communications Manager also supports whisper coaching, a CTI enhancement on silent monitoring wh...
Hi All,I have an issue since the upgrade where it looks like I am not getting Phone Services, IM&P is working.I have done some firewall monitoring and can see requests to port 6972 for TFTP, I have tried to connect to this port to see my jabber-config...
In future definitely the need arise that the old extensions requires to be deleted. If the extension deletion range is straight like example 1000, 1001, 1002, etc. then it’s very easy to delete. What if extension deletion it’s not in straight order like 1...
We are forwarding calls from Call Manager to another system. There is a lag. I was told to set the cisco side to unconditional forward so it bypasses the settings and forwards right away. I can't seem to find that setting or maybe its called somethi...
Hello!If you could help me and show me where I could find all the characteristics and differences among Meetings/Teams and Events of Webex have.I mean could I find this somewhere in a PDF document or anywhere on the website??Thank you in advance!