cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
223
Views
25
Helpful
5
Replies
Highlighted
Beginner

CDR Reports Issue

Hello,

 

I have CDR with my cucm 10.5, the issue is I have 2 E1 and I would like to know how I can configure the CDR to give me the report to what E1 is the calling connected.

 

Thanks. 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi opnineopnine,

 when you configure a gateway using SCCP, this info appears in CDR as SKIGW<last 10 characters of MAC> and with Module and Slot info that you configure in CUCM ... check your CDR for that info.

 

Hope this helps.

View solution in original post

5 REPLIES 5
Highlighted
Beginner

If you are using MGCP, the CDR should have the indication which E1 making the call.

Highlighted

Hello kinman-wong

 

Im now using mgcp al goes via sccp.

 

thanks.

Highlighted

Hi opnineopnine,

 when you configure a gateway using SCCP, this info appears in CDR as SKIGW<last 10 characters of MAC> and with Module and Slot info that you configure in CUCM ... check your CDR for that info.

 

Hope this helps.

View solution in original post

Highlighted

Marcelo,

 

Is there any software that you can recommend to read the output?

thanks

Highlighted

Hi opnineopnine,

 although CUCM has a tool called CAR (check this link), I prefer to use Excel to read the CDR for this kind of things (like a quick look in one of its data).

 The CUCM's CDR is in a .CSV format.

 

Hope this helps.