06-02-2015 09:52 AM - edited 03-18-2019 11:33 AM
Hello,
I have
Thanks.
Solved! Go to Solution.
06-03-2015 04:16 PM
Hi opnineopnine,
when you configure a gateway using SCCP, this info appears in CDR as SKIGW<last 10 characters of MAC> and with Module and Slot info that you configure in CUCM ... check your CDR for that info.
Hope this helps.
06-03-2015 02:39 AM
If you are using MGCP, the CDR should have the indication which E1 making the call.
06-03-2015 03:13 AM
Hello
06-03-2015 04:16 PM
Hi opnineopnine,
when you configure a gateway using SCCP, this info appears in CDR as SKIGW<last 10 characters of MAC> and with Module and Slot info that you configure in CUCM ... check your CDR for that info.
Hope this helps.
06-04-2015 06:17 AM
Marcelo,
Is there any software that you can recommend to read the output?
06-04-2015 09:04 AM
Hi opnineopnine,
although CUCM has a tool called CAR (check this link), I prefer to use Excel to read the CDR for this kind of things (like a quick look in one of its data).
The CUCM's CDR is in a .CSV format.
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: