cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
204
Views
0
Helpful
3
Replies
Highlighted
Beginner

Change in display Name in Fax machine on H323 GW

Hi,

Need to change current fax number from XXX-XXX-1234 to XXX-XXX-4321 on the FXS port on h323 Gateway, but the Caller ID should be displayed as  XXX-XXX-1234

Current configs:

voice-port 0/2/1
 station-id name Xerox Copier 1
 station-id number XXXXXX1234
 caller-id enable

 

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Hi.For incoming calls, sure

Hi.

For incoming calls, sure you can.

For outgoing calls, no because the number is fixed on that line by Carrier.

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
3 REPLIES 3

Hi.If you mean the printed

Hi.

If you mean the printed number that shows on fax received from a remote fax, you should be able change it directly on you fax machine and leave the voice port with current config

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
Beginner

Hi Carlo,I will be changing

Hi Carlo,

I will be changing station ID number but customer wants the old number to be displayed on the FAX machine, where customer will be sending fax to the old number  XXX-XXX-1234 but it should be received on the new number  XXX-XXX-4321, correct me if I amwrong, can I apply the below voice translation rules

voice-translation profile incoming fax
translate called 1
translate calling 2

voice-translation rule 1
rule 1  /XXX-XXX-4321/ /XXX-XXX-1234/

voice-translation rule 2
rule 2 /XXX-XXX-1234/ /XXX-XXX-4321/

Hi.For incoming calls, sure

Hi.

For incoming calls, sure you can.

For outgoing calls, no because the number is fixed on that line by Carrier.

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards