cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
25499
Views
21
Helpful
10
Replies

Changing background image on all phones over common phone settings

vlatkokozulj
Level 1
Level 1

Hello there.

 

I had setup possibility for phones to individually change background image.

I badly need option to change all at once.

I did try to change standard common phone setting.

Unchecked option that user can change background image.

Put the correct file name of image into background image filed  (in this particular case image.png), and check check box overide common setings.

After applying , nothing has change.

 

Where i did wrong
 

10 Replies 10

Manish Gogna
Cisco Employee
Cisco Employee

Hi,

For changing background image in one go, you can check the following post

https://supportforums.cisco.com/discussion/11458496/bulk-change-default-background-image-phones

HTH

Manish

CUCM 10.5...

Common Phone Profile -> Background Image file name with no path, and uncheck Enable End User Access to Phone Background Image.

Bulk to apply it to all the phones of a specific Phone Type and apply config

Bulk to restart every phone of a specific Phone Type.

Done, for 7911, 7962 and 7945...

in 10.5 the solution is working. I tested with many type of cisco phones.

Manish Prasad
Level 5
Level 5

https://supportforums.cisco.com/document/73356/implementing-phone-background-images-cisco-ip-phones

 

https://supportforums.cisco.com/document/44191/how-modifychange-background-image-ip-phone-new

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cupa/phone_designer/7-1/english/install/guide/Installation_Guide/PD1chapter.html

 

Thanks

Manish

Jaime Valencia
Cisco Employee
Cisco Employee

FYI, that option only works for 89XX and 99XX phones.

There are hundreds, and hundreds of posts on CSC about this, please search for answers before posting a question.

HTH

java

if this helps, please rate

Thanks for correct answer.

 

I was searching for answer, even found one You had post. But there was no mention of this limitation for 89xx and 99xx phones only.

 

So, there is no way to change background image in one go for 79xx phones?

I am trilled if this above is true. over 3000 phones to change.

Thanks

Not just configuring something in CUCM as you expected, possible methods (Free methods) require more work and some coding. Again, all have been discussed plenty of times before at CSC.

Or, you can buy a product for this: http://www.ipcommute.co.uk/

HTH

java

if this helps, please rate

CUCM 10.5...

Common Phone Profile -> Background Image file name with no path, and uncheck Enable End User Access to Phone Background Image.

Bulk to apply it to all the phones of a specific Phone Type and apply config

Bulk to restart every phone of a specific Phone Type.

Done, for 7911, 7962 and 7945...

Todd Hebert
Level 5
Level 5

I have 7945s and 7965s mostly on my network on CUCM 8.6.2.23900-10.  I checked and this is available in CUCM 10.0.1 also.  I created a common phone profile and unchecked the "Enable End User Access to Phone  Background Image Setting" then scrolled down to the bottom under "Product Specific Configuration Layout" and in the "Background Image" field I added "CompanyBG.png" which is the file name of the background image I wanted displayed that already is hosted on my TFTP server on each of my servers, I didn't include the path, and I checked the box and saved the profile.  Then I ran a batch job to change all the common phone profiles for all my phones and did a mass restart.  Now users get the approved company background image and can't change it.

Para versión CUCM 11 funciono la indicado por Todd Herbert

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: