07-08-2015 12:16 AM - edited 03-17-2019 03:34 AM
Hi,
there is a cluster of one pub and one sub of CUCM.
They are running as VM. The Pub and Sub are in different subnets.
Now the subnet from Subscriber get a new default gateway IP.
Is there any influence to licensing MAC or other if we change the subscribers default gateway IP?
Solved! Go to Solution.
07-08-2015 12:38 AM
you do not need to generate any fresh license after u change the default gateway for SUB.
if u are doing any below changes for PUB, then u need to generate/rehost licenseMAC
Cisco Unified Communications Manager on Virtual Servers in Release 8.x uses a different licensing model
than Cisco Unified Communications Manager on non-virtualized servers (including 7800 Series Media
Convergence Servers). The MAC address of the physical NIC card is no longer used to associate the license
to the server.The license is associated to a license MAC, which is a 12 digit HEX value created by hashing the following
parameters that you configure on the server:
• Time zone
• NTP server 1 (or “none”)
• NIC speed (or “auto”)
• Hostname
• IP Address (or “dhcp”)
• IP Mask (or “dhcp”)
• Gateway Address (or “dhcp”)
• Primary DNS (or “dhcp”)
• SMTP server (or “none”)
• Certificate Information (Organization, Unit, Location, State, Country)
regds,
aman
07-08-2015 12:30 AM
Hi,
which version of CUCM u are using ?
there are no licenses for SUB .
regds,
aman
07-08-2015 12:30 AM
CUCM 8.6.2
07-08-2015 12:38 AM
you do not need to generate any fresh license after u change the default gateway for SUB.
if u are doing any below changes for PUB, then u need to generate/rehost licenseMAC
Cisco Unified Communications Manager on Virtual Servers in Release 8.x uses a different licensing model
than Cisco Unified Communications Manager on non-virtualized servers (including 7800 Series Media
Convergence Servers). The MAC address of the physical NIC card is no longer used to associate the license
to the server.The license is associated to a license MAC, which is a 12 digit HEX value created by hashing the following
parameters that you configure on the server:
• Time zone
• NTP server 1 (or “none”)
• NIC speed (or “auto”)
• Hostname
• IP Address (or “dhcp”)
• IP Mask (or “dhcp”)
• Gateway Address (or “dhcp”)
• Primary DNS (or “dhcp”)
• SMTP server (or “none”)
• Certificate Information (Organization, Unit, Location, State, Country)
regds,
aman
07-08-2015 12:52 AM
Thank you very much for the quick response
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide