Check heat in the MCS

[aeriksson]

How can you check the heat (temperature) of a MCS-7825 (HP-based). We suspect maybe some issues with overheated equipment. Tried looking in the RMTP but found nothing there. Is there a command via SSH maybe?

[Craig Dyer]

Hi,

     From the console or SSH conection try:-

show environment temperatures

This should give you:-

ID      Type                            Temp/Threshold
1       CurrentReading                  22 C
1       LowerThresholdNonCritical       37 C
1       UpperThresholdNonCritical       38 C
1       LowerThresholdCritical          39 C
1       UpperThresholdCritical          45 C
1       UserThresholdNonCritical        38 C
1       UserThresholdCritical           45 C

You might also want to check 'show environment fans' while you there.

Hope this helps,

Craig

PLEASE RATE HELPFUL POSTS!