How can you check the heat (temperature) of a MCS-7825 (HP-based). We suspect maybe some issues with overheated equipment. Tried looking in the RMTP but found nothing there. Is there a command via SSH maybe?
ID Type Temp/Threshold 1 CurrentReading 22 C 1 LowerThresholdNonCritical 37 C 1 UpperThresholdNonCritical 38 C 1 LowerThresholdCritical 39 C 1 UpperThresholdCritical 45 C 1 UserThresholdNonCritical 38 C 1 UserThresholdCritical 45 C
You might also want to check 'show environment fans' while you there.
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...