10-09-2010 08:27 PM - edited 03-16-2019 01:15 AM
In a Cisco Call Manager 6, How I can check the time displayed on the screen of the remote phones? I dont have physical access to the Cisco phones.
10-10-2010 02:10 AM
-
Message was edited by: muzammel.haque
10-10-2010 02:20 AM
Hi, you can use the Unified FX Phoneview Free Edition to serve your purpose.
You can get it from here: http://www.unifiedfx.com/
Hope this helps!
Thanks,
Mijanur Rahman
10-11-2010 10:43 AM
I will review, thanks
10-11-2010 10:52 AM
Another way to do this is create a user in call manager that you know the password for, then associate the remote phone(s) as controlled devices to that user you created. From the Device > Phone page you can get the IP address of the remote phone, if it's a newer phone (7941/61/70 or newer) you can access http://
10-26-2018 07:50 AM
Thank you very much Joseph :)
10-27-2018 10:17 AM
I usually check it via the web-interface of the phone. There you can find all kind of information: Status, Network, even Call details
Please rate if this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide