cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
603
Views
0
Helpful
2
Replies
Highlighted
Beginner

CIPC Deployment

Hello,

I am enquiring on deploying CIPC using SMS. I have found plenty of docs on how to manipulate device names, TFTP servers, Etc... but I can not find a way to automatically select the box under the audio tab marked "optimize for low bandwidth" to force the device to user G729. Has any one performed this with success?

Thanks in advance.

Ken Gerace

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

I checked it on my machine and it is stored in the registry as a DWORD NetworkUseG729Only. If you set it to 1 it will effectively enable "optimize for low bandwidth"

The key location is:

HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Communicator

You should manage to automate setting that registry key for the user.

View solution in original post

2 REPLIES 2
Highlighted

Codec selection such as g729 is controlled and configured from call manager not from the phone side

Hope this help

Highlighted
Cisco Employee

I checked it on my machine and it is stored in the registry as a DWORD NetworkUseG729Only. If you set it to 1 it will effectively enable "optimize for low bandwidth"

The key location is:

HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Communicator

You should manage to automate setting that registry key for the user.

View solution in original post