Cisco 1941 router support voice?

[brandonabrown]

I'm getting conflicting info from TAC regarding a 1941 router supporting voice. Can anyone confirm or deny that a 1941 does in fact support voice? I need to make it a H323 gateway.

Thanks.

[acampbell · Accepted solution]

Hi,

You can NOT use a 1941 as a voice gateway.

It does not have PVDM/DSP support

It is an ISR but it is aimed at the routing/WAAS/Wireless arena

http://www.cisco.com/en/US/prod/collateral/routers/ps10538/data_sheet_c78_556319.html

You could look at a 2901

http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_553896.html

Or find a 28/38xx series

HTH

Alex

[Gajanan Pande]

To add to Alex's response, I would like to mention that 28xx/38xx are end of sale products & hence Cisco doesnt have any plans to enhance them to accomodate new features. Cisco recommends going with ISR G2s i.e. 29xx/39xx.

HTH

GP.

[aminahmed667606667]

can i use vfo card with 1941