11-14-2011 01:00 PM - edited 03-16-2019 08:03 AM
I'm getting conflicting info from TAC regarding a 1941 router supporting voice. Can anyone confirm or deny that a 1941 does in fact support voice? I need to make it a H323 gateway.
Thanks.
Solved! Go to Solution.
11-14-2011 04:31 PM
Hi,
You can NOT use a 1941 as a voice gateway.
It does not have PVDM/DSP support
It is an ISR but it is aimed at the routing/WAAS/Wireless arena
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/data_sheet_c78_556319.html
You could look at a 2901
http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_553896.html
Or find a 28/38xx series
HTH
Alex
11-14-2011 04:31 PM
Hi,
You can NOT use a 1941 as a voice gateway.
It does not have PVDM/DSP support
It is an ISR but it is aimed at the routing/WAAS/Wireless arena
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/data_sheet_c78_556319.html
You could look at a 2901
http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_553896.html
Or find a 28/38xx series
HTH
Alex
11-14-2011 09:02 PM
To add to Alex's response, I would like to mention that 28xx/38xx are end of sale products & hence Cisco doesnt have any plans to enhance them to accomodate new features. Cisco recommends going with ISR G2s i.e. 29xx/39xx.
HTH
GP.
02-10-2020 08:02 AM
can i use vfo card with 1941
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: