Hello;
I have a Siemens HiPath 3750 with TMS 2 card set with a protocol (S2M: Euro-ISDN PP WITH CRC4 Euronumeris = T2 + (ETSI) WITH CRC4) to make a connection with a cisco router 2610XM with IOS (c2600-ipvoice-mz.124-25) via an E1 card.
WHat protocol should I use cisco router side.
I ask if i can have a configuration example for this integration because I do not know if I should use the isdn switch-type on Net5 or QSIC, and the E1 controller configuration, and serial interface.
Thank you in advance for your help.
Regards.