11-22-2008 09:48 AM - edited 03-15-2019 02:41 PM
Hi Folks,
Please could somebody confirm if the 2801 router is capable of communication with Call Manager via H323.
I was just about to order the equipment for a deployment, until I came accross the following document:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/a08gw.html#wp1027449
Table 36-1, states that only MGCP is supported. I have done some searching through Cisco and i'm still unable to find a definitive answer.
Any help would be much appreciated.
Regards
Kris
11-22-2008 10:36 AM
Hi Kris,
There are some good answers to this question from Top NetPros Brandon and Paolo in this thread;
Hope this helps!
Rob
11-22-2008 12:09 PM
Hi Rob,
Thank's for the prompt reply. I thought that was the case, although after seeing the noted link, I was starting to doubt myself.
Cheers
Kris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide