Hello guys
I'm trying to configure e1 r2-digital in this product but don't show me the option:
hostname(config-controller)#ds0-group 0 timeslots 1-15,17-31 type ?
e&m-delay-dial E & M Delay Dial
e&m-immediate-start E & M Immediate Start
e&m-melcas-delay MEL CAS (CEPT) E & M Delay Start
e&m-melcas-immed MEL CAS (CEPT) E & M Immediate Start
e&m-melcas-wink MEL CAS (CEPT) E & M Wink Start
e&m-wink-start E & M Wink Start
fxo-ground-start FXO Ground Start
fxo-loop-start FXO Loop Start
fxo-melcas MEL CAS (Mercury) FXO
fxs-ground-start FXS Ground Start
fxs-loop-start FXS Loop Start
fxs-melcas MEL CAS (Mercury) FXS
I did the upgrade for the latest IOS version and same problem.
Can you help me?
System image file is "bootflash:isr4400-universalk9.03.13.00.S.154-3.S-ext.SPA.bin"
cisco ISR4451-X/K9
NAME: "NIM subslot 0/2", DESCR: "NIM-8MFT-T1/E1 - T1/E1 Serial Module"
PID: NIM-8MFT-T1/E1 , VID: V01, SN: FOC18103CNE
NAME: "NIM subslot 0/3", DESCR: "NIM-4MFT-T1/E1 - T1/E1 Serial Module"
PID: NIM-4MFT-T1/E1 , VID: V01, SN: FOC174194C4
Thank you