Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
632
Views
0
Helpful
4
Replies

Cisco 6941 web access

Syed Mohammed
Level 1
Level 1

‎04-12-2016 12:58 AM - edited ‎03-17-2019 06:32 AM

Hi,

We have 6941 IP phones, and we want to  access this phones via web browser?

Note: 6941 phones firmware is 9.4.1. And 7945,7975 phones are able to access via browser.

Regards,

Syed

Labels:
0 Helpful
4 Replies 4

Manish Gogna
Cisco Employee
Cisco Employee

‎04-12-2016 01:23 AM

Hi Syed,

Has the "Web Access" been enabled on the phone config page on cucm and the phone reset after enabling it?

Manish

0 Helpful

Syed Mohammed
Level 1
Level 1
In response to Manish Gogna

‎04-12-2016 01:38 AM

Hi Manish,

Thank you for your reply.

We have CME 2900 (ver 15.4) and CME 3900 (15.2(3)).

Regards,

Syed

0 Helpful

Manish Gogna
Cisco Employee
Cisco Employee
In response to Syed Mohammed

‎04-12-2016 02:02 AM

Looks like it is not supported yet for SIP phones

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCsh75624/?reffering_site=dumpcr

Try using SCCP protocol for 6941 and see if it works.

Manish

0 Helpful

Syed Mohammed
Level 1
Level 1
In response to Manish Gogna

‎04-12-2016 03:13 AM

we are using SCCP protocol.

Also is there any command or way I can checked registered phone data and time remotely? if web access is not working.

Regards,

Syed

0 Helpful
Customers Also Viewed These Support Documents