09-30-2022 04:49 AM - edited 09-30-2022 04:52 AM
Hello
I just set up an installation of 4 cisco ip phone with CME 9.1
2 ( 7911 Model )
2 ( 6945 Model )
All the 7911 ip phone was able to upload the firmware and works perfectly
The two others 6945 Ip phone model upload the firmware SCCP6945.9-2-1-0 successfully but can not registred
i read on several forum that this firmware version has a bug !!! can someone confirmthis information to me
09-30-2022 05:03 AM
What error you're seeing on Phone status message.
Have you checked all configurations related to this specific phones model ? Whey dont you try a different firmware then. ?
09-30-2022 05:14 AM
09-30-2022 05:19 AM
On some forum i read that the firmware SCCP6945.9-1-1-0 is the one who work perfectly but i can't find it anywhere even on cisco website
Do you have this firmware ??
03-22-2024 08:37 AM
I have the same problem, Im unable to register any 6945 phones, all show "Phone not Registred". I have tried cmterm-6945-sccp.9-2-1-0 and cmterm-6945-sip.9-2-1-0. both showing the same problem. my router is on Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(2)S3, RELEASE SOFTWARE (fc2). @DJAHIDCISCO did you find a solution to your problem ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide