cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
997
Views
0
Helpful
2
Replies

Cisco 7800 series ip phones

henry.benjamin
Level 1
Level 1

Hi All

 

cisco 7821 is configured with 8 speed dials however when you hit the down button it wil lonely show the first 6 ?

 

anyone have a resolution ?

 

You can still  dial the 7/8th speed dials but you cannot view them with the button (pressing down on the main button)  , pressing down gives you your speed dials (only 6) , pressing up gives you dial history (no limit)  ?

 

Cheers

Henry

1 Accepted Solution

Accepted Solutions

Hi,

 

If you would like to have more, you may configure Abbreviated Dialing which will give the option to use 99 index codes on the phone keypad.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_01010.html#PA2D_RF_F4618A32_00

 

Regards,

Murali

 

View solution in original post

2 Replies 2

Manish Gogna
Cisco Employee
Cisco Employee

Hi Henry,

I am able to recreate this in my lab setup and do not see any setting which allows this number to be increased beyond six speed dials, it most definitely looks like working as designed.

HTH

Manish

Hi,

 

If you would like to have more, you may configure Abbreviated Dialing which will give the option to use 99 index codes on the phone keypad.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_01010.html#PA2D_RF_F4618A32_00

 

Regards,

Murali