Cisco 7821 working as a SIP stuck at "Registering" once it loss the connectivity with CUCM, ( Using CUCM 11.0 ) even after getting connectivity from CUCM, it remains unregister, lets suppose a 7821 is register with CUCM, once we remove CUCM lan cable, 7821 should be unregistered but after plugging the lan cable to CUCM, the 7821 should register also, but 7821 SIP phone remain unregister while other SCCP phone got register automatically, the only solution untill now is removing the POE cable from phone and plugin back so it restart it, then 7821 register otherwise not, anyone have a Idea what is the problem ?
I do not see any specific bug for this. Can you check if the 7821 is running the latest firmware and if yes then get the packet captures from the IP phone after recreating the issue.
On VLAN interface where the phones are connected. You can set the ip MTU value "ip mtu bytes " to less then 1500
However i believe tcp window can also be set at global level.So better check with network team.