Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- Collaboration
- IP Telephony and Phones
- Sounds like you may have
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
1753
Views
0
Helpful
5
Replies
Cisco 7925 IP Phone not working !!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-24-2015 04:18 AM - edited 03-17-2019 02:26 AM
Hi,
We are using cisco 7925 wireless phones and though the phones gets registered with CUCM, it doesn't accept any calls. Also, the phone face intermittent registration problems.
2015-03-24 03:53:04:0610 CP-7925G user.crit netd: network down on wireless interface 2015-03-24 03:53:04:0610 CP-7925G user.crit netd: tell init to bring down network services 2015-03-24 03:53:04:0690 CP-7925G user.err Cisco7925-Init: Received SIGUSR1 2015-03-24 03:53:04:0690 CP-7925G user.debug Cisco7925-Init: Processing NetworkDown event 2015-03-24 03:53:04:0690 CP-7925G user.info Cisco7925-Init: stop_actions( event=networkup),state=systemup 2015-03-24 03:53:04:0690 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/tftpd[pid=544] 2015-03-24 03:53:04:0690 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/WlinkEnablerMgr[pid=546] 2015-03-24 03:53:04:0690 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=553] 2015-03-24 03:53:04:0690 CP-7925G user.debug javaService.exe: handler()-SIGTERM received 2015-03-24 03:53:04:0690 CP-7925G user.debug javaService.exe: Shutdown 2015-03-24 03:53:04:0690 CP-7925G user.debug javaService.exe: Java shutdown in progress so we reset MidletStateTable() 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/aom-launcher /sbin/javaService.exe[pid=556] 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/sccp[pid=563] 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Process /sbin/WlinkEnablerMgr run status=5 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=546 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Process /sbin/tftpd run status=5 2015-03-24 03:53:04:0950 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=544 2015-03-24 03:53:05:0080 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 295 Func: CmdPending client: sccp-appl command: 24 completed with error: 10 2015-03-24 03:53:05:0080 CP-7925G user.err SCCP: File: ../lib/wlan_applib.c Line: 94 Func: SendWlanIpc command: Set Call Bandwidth(24) response length:8 completed with error: 10 2015-03-24 03:53:05:0080 CP-7925G user.err SCCP: fifoRead select Error code: -1 2015-03-24 03:53:05:0110 CP-7925G user.info Cisco7925-Init: Process /sbin/sccp run status=5 2015-03-24 03:53:05:0110 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=563 2015-03-24 03:53:05:0700 CP-7925G user.info Cisco7925-Init: Process /sbin/aom-launcher /sbin/javaService.exe run status=5 2015-03-24 03:53:05:0700 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=556 2015-03-24 03:53:06:0730 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/tftpd[pid=544] 2015-03-24 03:53:06:0730 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/WlinkEnablerMgr[pid=546] 2015-03-24 03:53:06:0730 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=553] 2015-03-24 03:53:06:0740 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/aom-launcher /sbin/javaService.exe[pid=556] 2015-03-24 03:53:06:0740 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/sccp[pid=563] 2015-03-24 03:53:06:0880 CP-7925G user.crit netd: init brought down all the network dependent services 2015-03-24 03:53:06:0900 CP-7925G user.debug Cisco7925-Init: network services brought down!! 2015-03-24 03:53:09:0260 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:53:11:0320 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 4 2015-03-24 03:53:11:0330 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:53:11:0460 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:53:11:0790 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:53:11:0800 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 5 2015-03-24 03:53:11:0810 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:53:11:0950 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:54:08:0880 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:54:08:0930 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 6 2015-03-24 03:54:08:0950 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:54:09:0080 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:55:19:0270 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:55:19:0350 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 7 2015-03-24 03:55:19:0360 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:55:19:0490 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:55:19:0690 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:55:20:0050 CP-7925G user.crit netd: wlan connectivity established. selected profile index=0 2015-03-24 03:55:23:0470 CP-7925G user.crit dhcp[576]: Lease of 10.1.42.88 obtained, lease time 1036800 2015-03-24 03:55:25:0730 CP-7925G user.crit netd: network up on wireless interface 2015-03-24 03:55:25:0750 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/tftpd pid =609 2015-03-24 03:55:25:0750 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/tftpd pid=609 2015-03-24 03:55:25:0760 CP-7925G user.debug Cisco7925-Init: forked process pid=609 2015-03-24 03:55:25:0770 CP-7925G user.info Cisco7925-Init: Starting /sbin/tftpd , pid=609 2015-03-24 03:55:26:0090 CP-7925G user.info Cisco7925-Init: Received continue signal from process [609] 2015-03-24 03:55:26:0090 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(609) 2015-03-24 03:55:26:0090 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/tftpd[609] 2015-03-24 03:55:26:0090 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/tftpd 2015-03-24 03:55:26:0090 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/tftpd done 2015-03-24 03:55:26:0090 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/WlinkEnablerMgr pid =611 2015-03-24 03:55:26:0100 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/WlinkEnablerMgr done 2015-03-24 03:55:26:0100 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgtftp pid =612 2015-03-24 03:55:26:0100 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/cfgtftp pid=612 2015-03-24 03:55:26:0110 CP-7925G user.debug Cisco7925-Init: forked process pid=611 2015-03-24 03:55:26:0110 CP-7925G user.info Cisco7925-Init: Starting /sbin/WlinkEnablerMgr , pid=611 2015-03-24 03:55:26:0170 CP-7925G user.debug Cisco7925-Init: forked process pid=612 2015-03-24 03:55:26:0180 CP-7925G user.info Cisco7925-Init: Starting /sbin/cfgtftp , pid=612 2015-03-24 03:55:27:0140 CP-7925G user.err WlinkEnablerMgr: Wavelink Avalanche Server not configured 2015-03-24 03:55:29:0240 CP-7925G user.err CFGTFTP[612]: downloading CTLSEP649EF3B69130.tlv failed: File not found[2] 2015-03-24 03:55:29:0380 CP-7925G user.err secd: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 0 2015-03-24 03:55:31:0250 CP-7925G user.err CFGTFTP[612]: downloading WLAN649EF3B69130.xml failed: File not found[2] 2015-03-24 03:55:31:0250 CP-7925G user.err CFGTFTP[612]: Unable to download WLAN MAC file WLAN649EF3B69130.xml 2015-03-24 03:55:31:0890 CP-7925G user.err CFGTFTP[612]: downloading WLANDefault.xml failed: File not found[2] 2015-03-24 03:55:31:0900 CP-7925G user.err CFGTFTP[612]: Unable to download WLAN Def file /var/tmp/WLANDefault.xml 2015-03-24 03:55:41:0160 CP-7925G user.err secd: EROR:addSRST: ** no CTL, can't trust Config file 2015-03-24 03:55:41:0160 CP-7925G user.err secd: EROR:handleAddEntityReq: add entity FAILED, SRST ip<10.1.254.33> dns<HD-SRST> certFile<non_secure> 2015-03-24 03:55:41:0190 CP-7925G user.err CFGTFTP[612]: secReq_AddEntity( ENTITY_SRST, 10.1.254.33, DEVICE_NONSECURE) failed.... 2015-03-24 03:55:45:0800 CP-7925G user.err CFGTFTP[612]: downloading English_United_States/7921-kate.utf-8.xml failed: File not found[2] 2015-03-24 03:55:45:0800 CP-7925G user.err CFGTFTP[612]: Unable to download kate file 2015-03-24 03:55:45:0890 CP-7925G user.info Cisco7925-Init: Process /sbin/cfgtftp run status=1 2015-03-24 03:55:45:0890 CP-7925G user.info Cisco7925-Init: catchchild:pid =612 cmd=/sbin/cfgtftp normal termination 2015-03-24 03:55:45:0900 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/cfgtftp 2015-03-24 03:55:45:0900 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/cfgtftp done 2015-03-24 03:55:45:0900 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid =638 2015-03-24 03:55:45:0900 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid=638 2015-03-24 03:55:45:0910 CP-7925G user.debug Cisco7925-Init: forked process pid=638 2015-03-24 03:55:45:0920 CP-7925G user.info Cisco7925-Init: Starting /sbin/fwupdate , pid=638 2015-03-24 03:55:48:0850 CP-7925G user.info Cisco7925-Init: Received continue signal from process [638] 2015-03-24 03:55:48:0850 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(638) 2015-03-24 03:55:48:0850 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[638] 2015-03-24 03:55:48:0850 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log 2015-03-24 03:55:48:0850 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log done 2015-03-24 03:55:48:0850 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/aom-launcher /sbin/javaService.exe pid =641 2015-03-24 03:55:48:0850 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/aom-launcher /sbin/javaService.exe done 2015-03-24 03:55:48:0850 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/capfclnt pid =642 2015-03-24 03:55:48:0850 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/capfclnt pid=642 2015-03-24 03:55:48:0860 CP-7925G user.debug Cisco7925-Init: forked process pid=641 2015-03-24 03:55:48:0860 CP-7925G user.info Cisco7925-Init: Starting /sbin/aom-launcher , pid=641 2015-03-24 03:55:49:0280 CP-7925G user.debug javaService.exe: Starting child process 2015-03-24 03:55:49:0280 CP-7925G user.debug java: runMidlet - 0 = ./java 2015-03-24 03:55:49:0280 CP-7925G user.debug java: runMidlet - 1 = =HeapCapacity2M 2015-03-24 03:55:49:0280 CP-7925G user.debug java: runMidlet - 2 = internal 2015-03-24 03:55:49:0280 CP-7925G user.debug java: runMidlet - 3 = com.sun.midp.appmanager.MVMManager 2015-03-24 03:55:49:0280 CP-7925G user.debug java: JwcNativeSetJVMDisplayControl(false) 2015-03-24 03:55:49:0280 CP-7925G user.err java: sep_pos is here /appdb and app_dir is /sbin/midp/appdb and fsep is / 2015-03-24 03:55:49:0750 CP-7925G user.debug Cisco7925-Init: forked process pid=642 2015-03-24 03:55:49:0750 CP-7925G user.info Cisco7925-Init: Starting /sbin/capfclnt , pid=642 2015-03-24 03:55:50:0030 CP-7925G user.err capfclnt: Capf client cleaning internals data structure and states before termination 2015-03-24 03:55:50:0040 CP-7925G user.err EVMGR: recv err: Connection reset by peer 2015-03-24 03:55:50:0050 CP-7925G user.info Cisco7925-Init: Process /sbin/capfclnt run status=1 2015-03-24 03:55:50:0050 CP-7925G user.info Cisco7925-Init: catchchild:pid =642 cmd=/sbin/capfclnt normal termination 2015-03-24 03:55:50:0050 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/capfclnt 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/capfclnt done 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/sccp pid =648 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/sccp done 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: return from Handle_event(networkup) 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=612 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: Process: /sbin/cfgtftp terminated 612, exit_action=0 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=642 2015-03-24 03:55:50:0050 CP-7925G user.debug Cisco7925-Init: Process: /sbin/capfclnt terminated 642, exit_action=0 2015-03-24 03:55:50:0060 CP-7925G user.debug Cisco7925-Init: forked process pid=648 2015-03-24 03:55:50:0060 CP-7925G user.info Cisco7925-Init: Starting /sbin/sccp , pid=648 2015-03-24 03:55:50:0180 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 03:55:50:0540 CP-7925G user.info Cisco7925-Init: Process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log run status=4 2015-03-24 03:55:50:0540 CP-7925G user.info Cisco7925-Init: catchchild:pid =638 cmd=/sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log normal termination 2015-03-24 03:55:50:0540 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=638 2015-03-24 03:55:50:0540 CP-7925G user.debug Cisco7925-Init: Process: /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log terminated 638, exit_action=0 2015-03-24 03:55:53:0740 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 03:55:57:0970 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:55:57:0970 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:56:02:0740 CP-7925G user.err java: KNI native open0 BEGINS 2015-03-24 03:56:02:0740 CP-7925G user.err java: Calling pcsl_serversocket_open with port as 13322 2015-03-24 03:56:02:0750 CP-7925G user.err java: Calling pcsl_serversocket_open retuned 2015-03-24 03:56:03:0160 CP-7925G user.err java: jwcNativeApi():notifyMidletStateChange():System Application Suite not found!! 2015-03-24 03:56:03:0160 CP-7925G user.err java: NtvMdltMgr_GetNtvMdlt(-1): Invalid mdlt ref 2015-03-24 03:56:03:0160 CP-7925G user.err java: NtvMdlt_Active(-1):Invalid Midlet reference 2015-03-24 03:56:26:0480 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 03:57:38:0320 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 03:57:38:0620 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 03:57:39:0910 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 03:57:48:0300 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:57:48:0300 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:57:48:0490 CP-7925G user.err SCCP: Skinny_get_IPconnect: Could NOT getGNetutilVarVal! 2015-03-24 03:57:48:0490 CP-7925G user.err SCCP: fallback to CCM<ac:1 sb:2 re:0> 2015-03-24 03:57:49:0310 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 03:57:49:0580 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 03:57:53:0020 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:57:53:0020 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:59:33:0750 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 03:59:33:0860 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 03:59:34:0090 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 03:59:37:0270 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 03:59:37:0270 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:01:04:0190 CP-7925G user.err SCCP: Skinny_get_IPconnect: Could NOT getGNetutilVarVal! 2015-03-24 04:01:04:0190 CP-7925G user.err SCCP: fallback to CCM<ac:1 sb:2 re:0> 2015-03-24 04:01:04:0480 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:01:04:0740 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:01:07:0770 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:01:07:0780 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:01:37:0960 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:03:34:0630 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:03:34:0730 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:03:34:0910 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:04:05:0420 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:04:05:0530 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:04:45:0910 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:06:02:0350 CP-7925G user.err SCCP: requesting network reset. 2015-03-24 04:06:02:0390 CP-7925G user.crit netd: processing network reset. 2015-03-24 04:06:07:0820 CP-7925G user.crit netd: network down on wireless interface 2015-03-24 04:06:07:0830 CP-7925G user.crit netd: tell init to bring down network services 2015-03-24 04:06:07:0970 CP-7925G user.err Cisco7925-Init: Received SIGUSR1 2015-03-24 04:06:07:0980 CP-7925G user.debug Cisco7925-Init: Processing NetworkDown event 2015-03-24 04:06:07:0980 CP-7925G user.info Cisco7925-Init: stop_actions( event=networkup),state=systemup 2015-03-24 04:06:07:0980 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/tftpd[pid=609] 2015-03-24 04:06:07:0980 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/WlinkEnablerMgr[pid=611] 2015-03-24 04:06:07:0980 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=638] 2015-03-24 04:06:07:0980 CP-7925G user.debug javaService.exe: handler()-SIGTERM received 2015-03-24 04:06:08:0000 CP-7925G user.debug javaService.exe: Shutdown 2015-03-24 04:06:08:0000 CP-7925G user.debug javaService.exe: Java shutdown in progress so we reset MidletStateTable() 2015-03-24 04:06:08:0000 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/aom-launcher /sbin/javaService.exe[pid=641] 2015-03-24 04:06:08:0010 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/sccp[pid=648] 2015-03-24 04:06:08:0340 CP-7925G user.info Cisco7925-Init: Process /sbin/WlinkEnablerMgr run status=5 2015-03-24 04:06:08:0370 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=611 2015-03-24 04:06:08:0370 CP-7925G user.info Cisco7925-Init: Process /sbin/tftpd run status=5 2015-03-24 04:06:08:0370 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=609 2015-03-24 04:06:08:0530 CP-7925G user.info Cisco7925-Init: Process /sbin/sccp run status=5 2015-03-24 04:06:08:0530 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=648 2015-03-24 04:06:08:0830 CP-7925G user.crit dhcp[722]: Lease of 10.1.42.88 obtained, lease time 1036800 2015-03-24 04:06:09:0000 CP-7925G user.info Cisco7925-Init: Process /sbin/aom-launcher /sbin/javaService.exe run status=5 2015-03-24 04:06:09:0000 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=641 2015-03-24 04:06:10:0920 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/tftpd[pid=609] 2015-03-24 04:06:10:0920 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/WlinkEnablerMgr[pid=611] 2015-03-24 04:06:10:0920 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=638] 2015-03-24 04:06:10:0920 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/aom-launcher /sbin/javaService.exe[pid=641] 2015-03-24 04:06:10:0930 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/sccp[pid=648] 2015-03-24 04:06:11:0140 CP-7925G user.crit netd: init brought down all the network dependent services 2015-03-24 04:06:11:0160 CP-7925G user.debug Cisco7925-Init: network services brought down!! 2015-03-24 04:06:11:0330 CP-7925G user.crit netd: network up on wireless interface 2015-03-24 04:06:11:0350 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/tftpd pid =756 2015-03-24 04:06:11:0350 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/tftpd pid=756 2015-03-24 04:06:11:0360 CP-7925G user.debug Cisco7925-Init: forked process pid=756 2015-03-24 04:06:11:0370 CP-7925G user.info Cisco7925-Init: Starting /sbin/tftpd , pid=756 2015-03-24 04:06:11:0690 CP-7925G user.info Cisco7925-Init: Received continue signal from process [756] 2015-03-24 04:06:11:0690 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(756) 2015-03-24 04:06:11:0690 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/tftpd[756] 2015-03-24 04:06:11:0690 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/tftpd 2015-03-24 04:06:11:0690 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/tftpd done 2015-03-24 04:06:11:0690 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/WlinkEnablerMgr pid =759 2015-03-24 04:06:11:0700 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/WlinkEnablerMgr done 2015-03-24 04:06:11:0700 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgtftp pid =760 2015-03-24 04:06:11:0710 CP-7925G user.debug Cisco7925-Init: forked process pid=759 2015-03-24 04:06:11:0710 CP-7925G user.info Cisco7925-Init: Starting /sbin/WlinkEnablerMgr , pid=759 2015-03-24 04:06:11:0750 CP-7925G user.debug Cisco7925-Init: forked process pid=760 2015-03-24 04:06:11:0760 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/cfgtftp pid=760 2015-03-24 04:06:11:0920 CP-7925G user.info Cisco7925-Init: Starting /sbin/cfgtftp , pid=760 2015-03-24 04:06:13:0640 CP-7925G user.err CFGTFTP[760]: downloading CTLSEP649EF3B69130.tlv failed: File not found[2] 2015-03-24 04:06:14:0040 CP-7925G user.err secd: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 0 2015-03-24 04:06:14:0510 CP-7925G user.err WlinkEnablerMgr: Wavelink Avalanche Server not configured 2015-03-24 04:06:14:0650 CP-7925G user.err CFGTFTP[760]: downloading WLAN649EF3B69130.xml failed: File not found[2] 2015-03-24 04:06:14:0660 CP-7925G user.err CFGTFTP[760]: Unable to download WLAN MAC file WLAN649EF3B69130.xml 2015-03-24 04:06:16:0760 CP-7925G user.err CFGTFTP[760]: downloading WLANDefault.xml failed: File not found[2] 2015-03-24 04:06:16:0760 CP-7925G user.err CFGTFTP[760]: Unable to download WLAN Def file /var/tmp/WLANDefault.xml 2015-03-24 04:06:20:0910 CP-7925G user.err secd: EROR:addSRST: ** no CTL, can't trust Config file 2015-03-24 04:06:20:0920 CP-7925G user.err secd: EROR:handleAddEntityReq: add entity FAILED, SRST ip<10.1.254.33> dns<HD-SRST> certFile<non_secure> 2015-03-24 04:06:20:0950 CP-7925G user.err CFGTFTP[760]: secReq_AddEntity( ENTITY_SRST, 10.1.254.33, DEVICE_NONSECURE) failed.... 2015-03-24 04:06:26:0020 CP-7925G user.err CFGTFTP[760]: downloading English_United_States/7921-kate.utf-8.xml failed: File not found[2] 2015-03-24 04:06:26:0030 CP-7925G user.err CFGTFTP[760]: Unable to download kate file 2015-03-24 04:06:26:0040 CP-7925G user.info Cisco7925-Init: Process /sbin/cfgtftp run status=1 2015-03-24 04:06:26:0040 CP-7925G user.info Cisco7925-Init: catchchild:pid =760 cmd=/sbin/cfgtftp normal termination 2015-03-24 04:06:26:0050 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/cfgtftp 2015-03-24 04:06:26:0050 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/cfgtftp done 2015-03-24 04:06:26:0050 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid =786 2015-03-24 04:06:26:0050 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid=786 2015-03-24 04:06:26:0070 CP-7925G user.debug Cisco7925-Init: forked process pid=786 2015-03-24 04:06:26:0070 CP-7925G user.info Cisco7925-Init: Starting /sbin/fwupdate , pid=786 2015-03-24 04:06:29:0560 CP-7925G user.info Cisco7925-Init: Received continue signal from process [786] 2015-03-24 04:06:29:0560 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(786) 2015-03-24 04:06:29:0560 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[786] 2015-03-24 04:06:29:0560 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log 2015-03-24 04:06:29:0560 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log done 2015-03-24 04:06:29:0560 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/aom-launcher /sbin/javaService.exe pid =789 2015-03-24 04:06:29:0560 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/aom-launcher /sbin/javaService.exe done 2015-03-24 04:06:29:0560 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/capfclnt pid =790 2015-03-24 04:06:29:0560 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/capfclnt pid=790 2015-03-24 04:06:29:0560 CP-7925G user.debug Cisco7925-Init: forked process pid=789 2015-03-24 04:06:29:0570 CP-7925G user.info Cisco7925-Init: Starting /sbin/aom-launcher , pid=789 2015-03-24 04:06:29:0990 CP-7925G user.debug javaService.exe: Starting child process 2015-03-24 04:06:29:0990 CP-7925G user.debug java: runMidlet - 0 = ./java 2015-03-24 04:06:29:0990 CP-7925G user.debug java: runMidlet - 1 = =HeapCapacity2M 2015-03-24 04:06:29:0990 CP-7925G user.debug java: runMidlet - 2 = internal 2015-03-24 04:06:29:0990 CP-7925G user.debug java: runMidlet - 3 = com.sun.midp.appmanager.MVMManager 2015-03-24 04:06:29:0990 CP-7925G user.debug java: JwcNativeSetJVMDisplayControl(false) 2015-03-24 04:06:29:0990 CP-7925G user.err java: sep_pos is here /appdb and app_dir is /sbin/midp/appdb and fsep is / 2015-03-24 04:06:30:0360 CP-7925G user.debug Cisco7925-Init: forked process pid=790 2015-03-24 04:06:30:0360 CP-7925G user.info Cisco7925-Init: Starting /sbin/capfclnt , pid=790 2015-03-24 04:06:30:0460 CP-7925G user.err capfclnt: Capf client cleaning internals data structure and states before termination 2015-03-24 04:06:30:0470 CP-7925G user.err EVMGR: recv err: Connection reset by peer 2015-03-24 04:06:30:0480 CP-7925G user.info Cisco7925-Init: Process /sbin/capfclnt run status=1 2015-03-24 04:06:30:0480 CP-7925G user.info Cisco7925-Init: catchchild:pid =790 cmd=/sbin/capfclnt normal termination 2015-03-24 04:06:30:0480 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/capfclnt 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/capfclnt done 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/sccp pid =796 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/sccp done 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: return from Handle_event(networkup) 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=760 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: Process: /sbin/cfgtftp terminated 760, exit_action=0 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=790 2015-03-24 04:06:30:0480 CP-7925G user.debug Cisco7925-Init: Process: /sbin/capfclnt terminated 790, exit_action=0 2015-03-24 04:06:30:0490 CP-7925G user.debug Cisco7925-Init: forked process pid=796 2015-03-24 04:06:30:0490 CP-7925G user.info Cisco7925-Init: Starting /sbin/sccp , pid=796 2015-03-24 04:06:30:0590 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:06:30:0970 CP-7925G user.info Cisco7925-Init: Process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log run status=4 2015-03-24 04:06:30:0970 CP-7925G user.info Cisco7925-Init: catchchild:pid =786 cmd=/sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log normal termination 2015-03-24 04:06:30:0970 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=786 2015-03-24 04:06:30:0970 CP-7925G user.debug Cisco7925-Init: Process: /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log terminated 786, exit_action=0 2015-03-24 04:06:33:0830 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:06:37:0030 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:06:37:0030 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:06:42:0050 CP-7925G user.err java: KNI native open0 BEGINS 2015-03-24 04:06:42:0060 CP-7925G user.err java: Calling pcsl_serversocket_open with port as 13322 2015-03-24 04:06:42:0070 CP-7925G user.err java: Calling pcsl_serversocket_open retuned 2015-03-24 04:06:42:0560 CP-7925G user.err java: jwcNativeApi():notifyMidletStateChange():System Application Suite not found!! 2015-03-24 04:06:42:0560 CP-7925G user.err java: NtvMdltMgr_GetNtvMdlt(-1): Invalid mdlt ref 2015-03-24 04:06:42:0570 CP-7925G user.err java: NtvMdlt_Active(-1):Invalid Midlet reference 2015-03-24 04:08:46:0750 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:08:46:0900 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:08:47:0510 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:09:20:0740 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:09:20:0830 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:10:03:0890 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:10:47:0200 CP-7925G user.err SCCP: requesting network reset. 2015-03-24 04:10:47:0240 CP-7925G user.crit netd: processing network reset. 2015-03-24 04:10:52:0720 CP-7925G user.crit netd: network down on wireless interface 2015-03-24 04:10:52:0730 CP-7925G user.crit netd: tell init to bring down network services 2015-03-24 04:10:52:0910 CP-7925G user.err Cisco7925-Init: Received SIGUSR1 2015-03-24 04:10:52:0910 CP-7925G user.debug Cisco7925-Init: Processing NetworkDown event 2015-03-24 04:10:52:0910 CP-7925G user.info Cisco7925-Init: stop_actions( event=networkup),state=systemup 2015-03-24 04:10:52:0910 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/tftpd[pid=756] 2015-03-24 04:10:52:0910 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/WlinkEnablerMgr[pid=759] 2015-03-24 04:10:52:0910 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=786] 2015-03-24 04:10:52:0910 CP-7925G user.debug javaService.exe: handler()-SIGTERM received 2015-03-24 04:10:52:0920 CP-7925G user.debug javaService.exe: Shutdown 2015-03-24 04:10:52:0920 CP-7925G user.debug javaService.exe: Java shutdown in progress so we reset MidletStateTable() 2015-03-24 04:10:52:0920 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/aom-launcher /sbin/javaService.exe[pid=789] 2015-03-24 04:10:52:0920 CP-7925G user.info Cisco7925-Init: Sending TERMINATION signal to /sbin/sccp[pid=796] 2015-03-24 04:10:53:0270 CP-7925G user.info Cisco7925-Init: Process /sbin/WlinkEnablerMgr run status=5 2015-03-24 04:10:53:0270 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=759 2015-03-24 04:10:53:0270 CP-7925G user.info Cisco7925-Init: Process /sbin/tftpd run status=5 2015-03-24 04:10:53:0270 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=756 2015-03-24 04:10:53:0440 CP-7925G user.info Cisco7925-Init: Process /sbin/sccp run status=5 2015-03-24 04:10:53:0440 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=796 2015-03-24 04:10:53:0730 CP-7925G user.crit dhcp[841]: Lease of 10.1.42.88 obtained, lease time 1036800 2015-03-24 04:10:53:0940 CP-7925G user.info Cisco7925-Init: Process /sbin/aom-launcher /sbin/javaService.exe run status=5 2015-03-24 04:10:53:0940 CP-7925G user.info Cisco7925-Init: Init initiated stop for pid=789 2015-03-24 04:10:55:0800 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/tftpd[pid=756] 2015-03-24 04:10:55:0800 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/WlinkEnablerMgr[pid=759] 2015-03-24 04:10:55:0800 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[pid=786] 2015-03-24 04:10:55:0800 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/aom-launcher /sbin/javaService.exe[pid=789] 2015-03-24 04:10:55:0810 CP-7925G user.info Cisco7925-Init: sending SIGKILL to /sbin/sccp[pid=796] 2015-03-24 04:10:56:0020 CP-7925G user.crit netd: init brought down all the network dependent services 2015-03-24 04:10:56:0040 CP-7925G user.debug Cisco7925-Init: network services brought down!! 2015-03-24 04:10:56:0190 CP-7925G user.crit netd: network up on wireless interface 2015-03-24 04:10:56:0210 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/tftpd pid =876 2015-03-24 04:10:56:0210 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/tftpd pid=876 2015-03-24 04:10:56:0290 CP-7925G user.debug Cisco7925-Init: forked process pid=876 2015-03-24 04:10:56:0300 CP-7925G user.info Cisco7925-Init: Starting /sbin/tftpd , pid=876 2015-03-24 04:10:56:0550 CP-7925G user.info Cisco7925-Init: Received continue signal from process [876] 2015-03-24 04:10:56:0560 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(876) 2015-03-24 04:10:56:0560 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/tftpd[876] 2015-03-24 04:10:56:0560 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/tftpd 2015-03-24 04:10:56:0560 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/tftpd done 2015-03-24 04:10:56:0560 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/WlinkEnablerMgr pid =878 2015-03-24 04:10:56:0560 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/WlinkEnablerMgr done 2015-03-24 04:10:56:0560 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/cfgtftp pid =879 2015-03-24 04:10:56:0570 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/cfgtftp pid=879 2015-03-24 04:10:56:0570 CP-7925G user.debug Cisco7925-Init: forked process pid=878 2015-03-24 04:10:56:0580 CP-7925G user.info Cisco7925-Init: Starting /sbin/WlinkEnablerMgr , pid=878 2015-03-24 04:10:56:0620 CP-7925G user.debug Cisco7925-Init: forked process pid=879 2015-03-24 04:10:56:0630 CP-7925G user.info Cisco7925-Init: Starting /sbin/cfgtftp , pid=879 2015-03-24 04:10:57:0530 CP-7925G user.err WlinkEnablerMgr: Wavelink Avalanche Server not configured 2015-03-24 04:10:59:0030 CP-7925G user.err CFGTFTP[879]: downloading CTLSEP649EF3B69130.tlv failed: File not found[2] 2015-03-24 04:10:59:0190 CP-7925G user.err secd: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 0 2015-03-24 04:11:00:0270 CP-7925G user.err CFGTFTP[879]: downloading WLAN649EF3B69130.xml failed: File not found[2] 2015-03-24 04:11:00:0270 CP-7925G user.err CFGTFTP[879]: Unable to download WLAN MAC file WLAN649EF3B69130.xml 2015-03-24 04:11:01:0280 CP-7925G user.err CFGTFTP[879]: downloading WLANDefault.xml failed: File not found[2] 2015-03-24 04:11:01:0280 CP-7925G user.err CFGTFTP[879]: Unable to download WLAN Def file /var/tmp/WLANDefault.xml 2015-03-24 04:11:10:0960 CP-7925G user.err secd: EROR:addSRST: ** no CTL, can't trust Config file 2015-03-24 04:11:10:0960 CP-7925G user.err secd: EROR:handleAddEntityReq: add entity FAILED, SRST ip<10.1.254.33> dns<HD-SRST> certFile<non_secure> 2015-03-24 04:11:11:0000 CP-7925G user.err CFGTFTP[879]: secReq_AddEntity( ENTITY_SRST, 10.1.254.33, DEVICE_NONSECURE) failed.... 2015-03-24 04:11:15:0570 CP-7925G user.err CFGTFTP[879]: downloading English_United_States/7921-kate.utf-8.xml failed: File not found[2] 2015-03-24 04:11:15:0570 CP-7925G user.err CFGTFTP[879]: Unable to download kate file 2015-03-24 04:11:15:0600 CP-7925G user.info Cisco7925-Init: Process /sbin/cfgtftp run status=1 2015-03-24 04:11:15:0600 CP-7925G user.info Cisco7925-Init: catchchild:pid =879 cmd=/sbin/cfgtftp normal termination 2015-03-24 04:11:15:0600 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/cfgtftp 2015-03-24 04:11:15:0610 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/cfgtftp done 2015-03-24 04:11:15:0610 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid =905 2015-03-24 04:11:15:0610 CP-7925G user.info Cisco7925-Init: Waiting for 1 from /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log pid=905 2015-03-24 04:11:15:0620 CP-7925G user.debug Cisco7925-Init: forked process pid=905 2015-03-24 04:11:15:0620 CP-7925G user.info Cisco7925-Init: Starting /sbin/fwupdate , pid=905 2015-03-24 04:11:18:0720 CP-7925G user.info Cisco7925-Init: Received continue signal from process [905] 2015-03-24 04:11:18:0720 CP-7925G user.info Cisco7925-Init: storing sigcont sender pid(905) 2015-03-24 04:11:18:0730 CP-7925G user.info Cisco7925-Init: Received continue signal from process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log[905] 2015-03-24 04:11:18:0730 CP-7925G user.info Cisco7925-Init: Received CONTINUE signal for /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log 2015-03-24 04:11:18:0730 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log done 2015-03-24 04:11:18:0730 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/aom-launcher /sbin/javaService.exe pid =908 2015-03-24 04:11:18:0730 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/aom-launcher /sbin/javaService.exe done 2015-03-24 04:11:18:0730 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/capfclnt pid =909 2015-03-24 04:11:18:0740 CP-7925G user.info Cisco7925-Init: Waiting for 2 from /sbin/capfclnt pid=909 2015-03-24 04:11:18:0740 CP-7925G user.debug Cisco7925-Init: forked process pid=908 2015-03-24 04:11:18:0740 CP-7925G user.info Cisco7925-Init: Starting /sbin/aom-launcher , pid=908 2015-03-24 04:11:19:0340 CP-7925G user.debug javaService.exe: Starting child process 2015-03-24 04:11:19:0340 CP-7925G user.debug java: runMidlet - 0 = ./java 2015-03-24 04:11:19:0340 CP-7925G user.debug java: runMidlet - 1 = =HeapCapacity2M 2015-03-24 04:11:19:0340 CP-7925G user.debug java: runMidlet - 2 = internal 2015-03-24 04:11:19:0340 CP-7925G user.debug java: runMidlet - 3 = com.sun.midp.appmanager.MVMManager 2015-03-24 04:11:19:0340 CP-7925G user.debug java: JwcNativeSetJVMDisplayControl(false) 2015-03-24 04:11:19:0340 CP-7925G user.err java: sep_pos is here /appdb and app_dir is /sbin/midp/appdb and fsep is / 2015-03-24 04:11:19:0530 CP-7925G user.debug Cisco7925-Init: forked process pid=909 2015-03-24 04:11:19:0530 CP-7925G user.info Cisco7925-Init: Starting /sbin/capfclnt , pid=909 2015-03-24 04:11:19:0840 CP-7925G user.err capfclnt: Capf client cleaning internals data structure and states before termination 2015-03-24 04:11:19:0850 CP-7925G user.err EVMGR: recv err: Connection reset by peer 2015-03-24 04:11:19:0860 CP-7925G user.info Cisco7925-Init: Process /sbin/capfclnt run status=1 2015-03-24 04:11:19:0860 CP-7925G user.info Cisco7925-Init: catchchild:pid =909 cmd=/sbin/capfclnt normal termination 2015-03-24 04:11:19:0860 CP-7925G user.info Cisco7925-Init: Received COMPLETE signal for /sbin/capfclnt 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/capfclnt done 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: Updating pid to action /sbin/sccp pid =915 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: run state [networkup]action /sbin/sccp done 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: return from Handle_event(networkup) 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=879 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: Process: /sbin/cfgtftp terminated 879, exit_action=0 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=909 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: Process: /sbin/capfclnt terminated 909, exit_action=0 2015-03-24 04:11:19:0860 CP-7925G user.debug Cisco7925-Init: forked process pid=915 2015-03-24 04:11:19:0870 CP-7925G user.info Cisco7925-Init: Starting /sbin/sccp , pid=915 2015-03-24 04:11:19:0970 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:11:20:0410 CP-7925G user.info Cisco7925-Init: Process /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log run status=4 2015-03-24 04:11:20:0410 CP-7925G user.info Cisco7925-Init: catchchild:pid =905 cmd=/sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log normal termination 2015-03-24 04:11:20:0410 CP-7925G user.debug Cisco7925-Init: Processing Child termincation..pid=905 2015-03-24 04:11:20:0410 CP-7925G user.debug Cisco7925-Init: Process: /sbin/fwupdate -s --cont --nobgchk --memchk 3600 -o /var/log/fwupdate.log terminated 905, exit_action=0 2015-03-24 04:11:23:0240 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:11:26:0030 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:11:26:0030 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:11:32:0950 CP-7925G user.err java: KNI native open0 BEGINS 2015-03-24 04:11:32:0950 CP-7925G user.err java: Calling pcsl_serversocket_open with port as 13322 2015-03-24 04:11:32:0960 CP-7925G user.err java: Calling pcsl_serversocket_open retuned 2015-03-24 04:11:33:0230 CP-7925G user.err java: jwcNativeApi():notifyMidletStateChange():System Application Suite not found!! 2015-03-24 04:11:33:0240 CP-7925G user.err java: NtvMdltMgr_GetNtvMdlt(-1): Invalid mdlt ref 2015-03-24 04:11:33:0240 CP-7925G user.err java: NtvMdlt_Active(-1):Invalid Midlet reference 2015-03-24 04:14:10:0290 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:14:10:0500 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:14:11:0100 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:14:18:0300 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:14:18:0300 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:14:18:0490 CP-7925G user.err SCCP: Skinny_get_IPconnect: Could NOT getGNetutilVarVal! 2015-03-24 04:14:18:0490 CP-7925G user.err SCCP: fallback to CCM<ac:1 sb:2 re:0> 2015-03-24 04:14:19:0080 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:14:19:0350 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:14:22:0920 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:14:22:0920 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:16:59:0430 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:16:59:0550 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:16:59:0770 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:17:06:0310 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:17:06:0310 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:17:06:0520 CP-7925G user.err SCCP: Skinny_get_IPconnect: Could NOT getGNetutilVarVal! 2015-03-24 04:17:06:0520 CP-7925G user.err SCCP: fallback to CCM<ac:1 sb:2 re:0> 2015-03-24 04:17:07:0300 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:17:07:0570 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:17:11:0310 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:17:11:0310 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:19:29:0510 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:19:30:0150 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 1 2015-03-24 04:19:30:0170 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:19:30:0370 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:19:30:0670 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:20:27:0100 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:20:27:0440 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:20:27:0950 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:22:11:0120 CP-7925G user.err SCCP: pri-tcp timeout<-47> 2015-03-24 04:22:11:0230 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:22:11:0460 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:22:14:0310 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:22:14:0310 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:22:14:0360 CP-7925G user.err SCCP: Skinny_get_IPconnect: Could NOT getGNetutilVarVal! 2015-03-24 04:22:14:0360 CP-7925G user.err SCCP: fallback to CCM<ac:2 sb:-1 re:0> 2015-03-24 04:22:14:0940 CP-7925G user.err netd: SCCP Requested a network status check 2015-03-24 04:22:15:0200 CP-7925G user.info modprobe: insmod -s -k eth0 2015-03-24 04:22:18:0290 CP-7925G user.err SCCP: Skinny_get_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:22:18:0290 CP-7925G user.err SCCP: Skinny_get_alt_tftpIp: Could NOT getGNetutilVarVal! 2015-03-24 04:23:31:0710 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:31:0800 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 1 2015-03-24 04:23:31:0820 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:32:0040 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:32:0340 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:32:0390 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 2 2015-03-24 04:23:32:0400 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:32:0600 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:32:0940 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:35:0870 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:35:0940 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 1 2015-03-24 04:23:35:0960 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:36:0170 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:36:0470 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:36:0520 CP-7925G user.err WLANMGR: File: ../dil/wlanmgr_ipc.c Line: 489 Func: send_conn_failed_event profile 0 - Association failure count: 2 2015-03-24 04:23:36:0530 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:36:0730 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1 2015-03-24 04:23:37:0140 CP-7925G user.err WLANMGR: File: ../dal/TI/wlan_wrapper.h Line: 342 Func: WRAP_SetBtCoeEnable TI_SetBtCoeEnable returned error 1
Please assist. Thanks in advance.
Labels:
- Labels:
-
IP Phone and Accessories
5 Replies 5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-24-2015 04:36 AM
Sounds like you may have connectivity issues.
Have you tried setting up a simple WEP or WPA SSID for test purposes?
Have you any security/firewalls/NAT etc between the wireless and CUCM?
What are your signal/coverage levels?
Aaron
Aaron
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-24-2015 05:25 AM
Hi Aaron,
We tried to setup a simple WEP and SSID for test purpose, that didn't work.
There is security but it allows the traffic.
Signal is good.
Please suggest, what else can be done.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-24-2015 07:47 AM
Hi
So if everything was good, it would work.
I would suggest you go back and review those elements.
Aaron
Aaron
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-25-2015 10:33 PM
Can you check if the wireless signal bar changes color from green to either yellow/gray?
What firmware is the phone running on?
Describe your wireless network.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-02-2015 05:11 PM
We tried to setup a simple WEP and SSID for test purpose, that didn't work.
Ok, let's go down to the basics, shall we?
Create an SSID with OPEN authentication. See if your phone will join that SSID. If it can, then start cranking up security/encryption until you break things.
For the record, 792X phones work well with WPA2 with AES/PSK and CCKM.
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Customers Also Viewed These Support Documents