cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1198
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco 7971 wont stay up!

Hello, I have an office full of 7971 phones and there are a few that no longer stand up.

The stand at the back is working OK, it sounds like a ratchet or something inside the phone is broken and moving around.... The stand just flops around.

Is there any way to fix this without having to replace the whole phone?

Thanks,

Nathan

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advisor

An interesting solution to a similar problem:

https://supportforums.cisco.com/message/3062567#3062567

HTH.

Regards,

Bill

On 7/12/10 11:23 PM, "ntong@fbrice.com.au"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

View solution in original post

2 REPLIES 2
Highlighted
Advisor

An interesting solution to a similar problem:

https://supportforums.cisco.com/message/3062567#3062567

HTH.

Regards,

Bill

On 7/12/10 11:23 PM, "ntong@fbrice.com.au"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

View solution in original post

Highlighted

Hello, looks like I will have to do similar...

I dont need it to go up and down.... just to stay in place. Willl open up the phone and see if I can wedge something in there to keep it up.

Thanks for the link.

!